Re: [PATCH v2 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Sudeep Holla <sudeep.holla@arm.com>]

On Wed, Jun 05, 2019 at 01:52:00PM +0300, Talel Shenhar wrote:
> Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding.
> 
> Signed-off-by: Talel Shenhar <talel@amazon.com>
> ---
>  .../interrupt-controller/amazon,al-fic.txt         | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> new file mode 100644
> index 0000000..a2f31a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> @@ -0,0 +1,22 @@
> +Amazon's Annapurna Labs Fabric Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: should be "amazon,al-fic"
> +- reg: physical base address and size of the registers
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: must be 2.
> +- interrupt-parent: specifies the parent interrupt controller.
> +- interrupts: describes which input line in the interrupt parent, this
> +  fic's output is connected to.
> +
> +Example:
> +
> +amazon_fic: amazon_fic {

above must be:

amazon_fic: interrupt-controller@0xfd8a8500 {

--
Regards,
Sudeep