devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tomer Maimon <tmaimon77@gmail.com>
To: olof@lixom.net, gregkh@linuxfoundation.org, arnd@arndb.de,
	robh+dt@kernel.org, mark.rutland@arm.com, avifishman70@gmail.com,
	venture@google.com, yuenn@google.com, benjaminfair@google.com,
	joel@jms.id.au
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	openbmc@lists.ozlabs.org, Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v1 0/2] soc: add NPCM LPC BPC driver support
Date: Mon, 10 Jun 2019 16:32:43 +0300	[thread overview]
Message-ID: <20190610133245.306812-1-tmaimon77@gmail.com> (raw)

This patch set adds LPC BIOS Post code (BPC) support for the
Nuvoton NPCM Baseboard Management Controller (BMC).

Nuvoton BMC NPCM LPC BIOS Post Code (BPC) monitoring two
configurable I/O addresses written by the host on the
Low Pin Count (LPC) bus, the capture data stored in 128-word FIFO.

NPCM BPC can support capture double words.

The NPCM7xx BPC driver tested on NPCM750 evaluation board.

NPCM BPC driver upstream process start few months ago on misc folder
http://lkml.iu.edu/hypermail/linux/kernel/1904.2/00412.html

The NPCM LPC BPC is similar to Aspeed LPC snoop, last 
kernel 5.0.2 Aspeed LPC snoop driver moved from misc folder to 
soc folder, so it seems NPCM BPC dirver should upstream to soc 
as well.
https://lkml.org/lkml/2019/4/22/377

I have created common lpc-snoop documentation for both 
Nuvoton and Aspeed drivers as Andrew suggested.
Andrew Jeffery: https://patchwork.kernel.org/patch/10506269/ 

I add Andrew and Rob reviewed signature because they already reviewed 
and signed  the lpc-snoop documentation in the misc folder
https://lkml.org/lkml/2019/4/29/998 

Tomer Maimon (2):
  dt-binding: soc: Add common LPC snoop documentation
  soc: nuvoton: add NPCM LPC BPC driver

 .../devicetree/bindings/soc/lpc/lpc-snoop.txt |  27 ++
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/nuvoton/Kconfig                   |  16 +
 drivers/soc/nuvoton/Makefile                  |   2 +
 drivers/soc/nuvoton/npcm-lpc-bpc-snoop.c      | 387 ++++++++++++++++++
 6 files changed, 434 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/lpc/lpc-snoop.txt
 create mode 100644 drivers/soc/nuvoton/Kconfig
 create mode 100644 drivers/soc/nuvoton/Makefile
 create mode 100644 drivers/soc/nuvoton/npcm-lpc-bpc-snoop.c

-- 
2.18.0

             reply	other threads:[~2019-06-10 13:32 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-10 13:32 Tomer Maimon [this message]
2019-06-10 13:32 ` [PATCH v1 1/2] dt-binding: soc: Add common LPC snoop documentation Tomer Maimon
2019-06-10 13:32 ` [PATCH v1 2/2] soc: nuvoton: add NPCM LPC BPC driver Tomer Maimon
2019-06-11 13:11   ` Arnd Bergmann
2019-06-13  9:26     ` Tomer Maimon
2019-06-13 11:49       ` Arnd Bergmann
  -- strict thread matches above, loose matches on Subject: below --
2022-11-22 20:12 [PATCH v1 0/2] soc: add NPCM LPC BPC driver support Tomer Maimon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190610133245.306812-1-tmaimon77@gmail.com \
    --to=tmaimon77@gmail.com \
    --cc=arnd@arndb.de \
    --cc=avifishman70@gmail.com \
    --cc=benjaminfair@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=joel@jms.id.au \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=venture@google.com \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).