From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: Re: [PATCH v3 2/3] reset: qcom-pon: Add support for gen2 pon
Date: Sun, 16 Jun 2019 11:56:37 -0700
Message-ID: <20190616185637.GE31088@tuxbook-pro>
References: <20190614231451.45998-1-john.stultz@linaro.org>
 <20190614231451.45998-2-john.stultz@linaro.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20190614231451.45998-2-john.stultz@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
To: Sebastian Reichel <sre@kernel.org>, John Stultz <john.stultz@linaro.org>
Cc: lkml <linux-kernel@vger.kernel.org>, Andy Gross <agross@kernel.org>, David Brown <david.brown@linaro.org>, Amit Pundir <amit.pundir@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
List-Id: devicetree@vger.kernel.org

On Fri 14 Jun 16:14 PDT 2019, John Stultz wrote:

> Add support for gen2 pon register so "reboot bootloader" can
> work on pixel3 and db845.
> 
> Cc: Andy Gross <agross@kernel.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Amit Pundir <amit.pundir@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> 

Sebastian, please take the first two patches through your tree and we'll
pick the dts patch through arm-soc.

Regards,
Bjorn

> v2:
> * Split out dts changes into separate path
> * Minor cleanups and remove unused variables
> ---
>  drivers/power/reset/qcom-pon.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
> index 3fa1642d4c543..22a743a0bf28c 100644
> --- a/drivers/power/reset/qcom-pon.c
> +++ b/drivers/power/reset/qcom-pon.c
> @@ -14,11 +14,15 @@
>  
>  #define PON_SOFT_RB_SPARE		0x8f
>  
> +#define GEN1_REASON_SHIFT		2
> +#define GEN2_REASON_SHIFT		1
> +
>  struct pm8916_pon {
>  	struct device *dev;
>  	struct regmap *regmap;
>  	u32 baseaddr;
>  	struct reboot_mode_driver reboot_mode;
> +	long reason_shift;
>  };
>  
>  static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
> @@ -30,7 +34,7 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
>  
>  	ret = regmap_update_bits(pon->regmap,
>  				 pon->baseaddr + PON_SOFT_RB_SPARE,
> -				 0xfc, magic << 2);
> +				 0xfc, magic << pon->reason_shift);
>  	if (ret < 0)
>  		dev_err(pon->dev, "update reboot mode bits failed\n");
>  
> @@ -60,6 +64,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
>  		return error;
>  
>  	pon->reboot_mode.dev = &pdev->dev;
> +	pon->reason_shift = (long)of_device_get_match_data(&pdev->dev);
>  	pon->reboot_mode.write = pm8916_reboot_mode_write;
>  	error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
>  	if (error) {
> @@ -73,8 +78,9 @@ static int pm8916_pon_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id pm8916_pon_id_table[] = {
> -	{ .compatible = "qcom,pm8916-pon" },
> -	{ .compatible = "qcom,pms405-pon" },
> +	{ .compatible = "qcom,pm8916-pon", .data = (void *)GEN1_REASON_SHIFT },
> +	{ .compatible = "qcom,pms405-pon", .data = (void *)GEN1_REASON_SHIFT },
> +	{ .compatible = "qcom,pm8998-pon", .data = (void *)GEN2_REASON_SHIFT },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
> -- 
> 2.17.1
>