From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: [PATCH v6 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K Date: Wed, 19 Jun 2019 16:15:39 +0200 Message-ID: <20190619141539.16884-7-gregory.clement@bootlin.com> References: <20190619141539.16884-1-gregory.clement@bootlin.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190619141539.16884-1-gregory.clement@bootlin.com> Sender: linux-kernel-owner@vger.kernel.org To: Stephen Boyd , Mike Turquette , linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT , Thomas Petazzoni , linux-arm-kernel@lists.infradead.org, Antoine Tenart , =?UTF-8?q?Miqu=C3=A8l=20Raynal?= , Maxime Chevallier List-Id: devicetree@vger.kernel.org Add cpu clock node on AP Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++ arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 7 +++++++ 2 files changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index 2baafe12ebd4..472211159979 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -20,24 +20,28 @@ compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; + clocks = <&cpu_clk 0>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; + clocks = <&cpu_clk 0>; }; cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; + clocks = <&cpu_clk 1>; }; cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; + clocks = <&cpu_clk 1>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 91dad7e4ee59..ed039aa8188f 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -280,6 +280,13 @@ #address-cells = <1>; #size-cells = <1>; + cpu_clk: clock-cpu@0 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; + ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; -- 2.20.1