From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Sangbeom Kim <sbkim73@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Lee Jones <lee.jones@linaro.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
notify@kernel.org, Sylwester Nawrocki <snawrocki@kernel.org>
Subject: [PATCH 6/6] ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family
Date: Thu, 20 Jun 2019 20:35:30 +0200 [thread overview]
Message-ID: <20190620183530.5386-6-krzk@kernel.org> (raw)
In-Reply-To: <20190620183530.5386-1-krzk@kernel.org>
Add the PMIC regulator suspend configuration to entire Odroid
XU3/XU4/HC1 family of boards to reduce power usage during suspend. The
configuration is based on vendor (Hardkernel) reference kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Tested on XU3 and HC1 with SD card.
---
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 92 +++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 0f967259ad29..5a4f7dd2568b 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -177,6 +177,10 @@
regulator-name = "vdd_adc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo5_reg: LDO5 {
@@ -184,6 +188,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo6_reg: LDO6 {
@@ -191,6 +199,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo7_reg: LDO7 {
@@ -198,6 +210,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo8_reg: LDO8 {
@@ -205,6 +221,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: LDO9 {
@@ -212,6 +232,10 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo10_reg: LDO10 {
@@ -219,6 +243,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: LDO11 {
@@ -226,6 +254,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo12_reg: LDO12 {
@@ -239,6 +271,10 @@
regulator-name = "vddq_mmc2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo14_reg: LDO14 {
@@ -253,6 +289,10 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo16_reg: LDO16 {
@@ -267,18 +307,30 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo18_reg: LDO18 {
regulator-name = "vdd_emmc_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo20_reg: LDO20 {
@@ -307,6 +359,10 @@
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo24_reg: LDO24 {
@@ -328,6 +384,10 @@
regulator-name = "vdd_ldo26";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3950000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo27_reg: LDO27 {
@@ -335,6 +395,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo28_reg: LDO28 {
@@ -342,6 +406,10 @@
regulator-name = "vdd_ldo28";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3950000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo29_reg: LDO29 {
@@ -420,6 +488,10 @@
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
@@ -428,6 +500,10 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
@@ -436,6 +512,10 @@
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
@@ -444,6 +524,10 @@
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
@@ -460,6 +544,10 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
@@ -490,6 +578,10 @@
regulator-name = "vdd_vmem";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
};
};
--
2.17.1
next prev parent reply other threads:[~2019-06-20 18:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-20 18:35 [PATCH 1/6] regulator: s2mps11: Consistently use local variable Krzysztof Kozlowski
2019-06-20 18:35 ` [PATCH 2/6] regulator: s2mps11: Reduce number of rdev_get_id() calls Krzysztof Kozlowski
2019-06-24 16:32 ` Applied "regulator: s2mps11: Reduce number of rdev_get_id() calls" to the regulator tree Mark Brown
2019-06-20 18:35 ` [PATCH 3/6] regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend Krzysztof Kozlowski
2019-06-24 16:32 ` Applied "regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend" to the regulator tree Mark Brown
2019-06-20 18:35 ` [PATCH 4/6] ARM: dts: exynos: Disable unused buck10 regulator on Odroid HC1 board Krzysztof Kozlowski
2019-06-20 18:35 ` [PATCH 5/6] ARM: dts: exynos: Add regulator suspend configuration to Arndale Octa board Krzysztof Kozlowski
2019-06-20 18:35 ` Krzysztof Kozlowski [this message]
2019-06-21 11:13 ` [PATCH 6/6] ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family Marek Szyprowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190620183530.5386-6-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=notify@kernel.org \
--cc=sbkim73@samsung.com \
--cc=snawrocki@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).