Re: [PATCH v3 9/9] ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3

[Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 3252 bytes --]

On Sun, Jun 23, 2019 at 12:38:01PM +0800, Icenowy Zheng wrote:
> Lichee zero plus is a core board made by Sipeed, which includes on-board
> TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
> header, a microUSB slot and a gold finger connector for expansion. It
> can use either Sochip S3 or Allwinner S3L SoC.
>
> Add the basic device tree for the core board, w/o optional onboard
> storage, and with S3 SoC.
>
> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> ---
> Changes in v3:
> - Drop common regulator DTSI usage and added vcc3v3 regulator.
>
>  arch/arm/boot/dts/Makefile                    |  1 +
>  .../boot/dts/sun8i-s3-lichee-zero-plus.dts    |  8 ++++
>  .../dts/sun8i-s3-s3l-lichee-zero-plus.dtsi    | 44 +++++++++++++++++++
>  3 files changed, 53 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
>  create mode 100644 arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c4742afe41a7..d24dec29245e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1113,6 +1113,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>  	sun8i-r16-nintendo-super-nes-classic.dtb \
>  	sun8i-r16-parrot.dtb \
>  	sun8i-r40-bananapi-m2-ultra.dtb \
> +	sun8i-s3-lichee-zero-plus.dtb \
>  	sun8i-t3-cqa3t-bv3.dtb \
>  	sun8i-v3s-licheepi-zero.dtb \
>  	sun8i-v3s-licheepi-zero-dock.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
> new file mode 100644
> index 000000000000..7d2f6b145190
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-s3.dtsi"
> +#include "sun8i-s3-s3l-lichee-zero-plus.dtsi"
> diff --git a/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
> new file mode 100644
> index 000000000000..e68f738c3046
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-s3l-lichee-zero-plus.dtsi
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reg_vcc3v3: vcc3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&mmc0 {
> +	broken-cd;
> +	bus-width = <4>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-0 = <&uart0_pb_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&usb_otg {
> +	dr_mode = "otg";
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +};

How can it do OTG if there's no controllable VBUS regulator?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com