From: Mircea Caprioru <mircea.caprioru@analog.com>
To: jic23@kernel.org
Cc: Michael.Hennerich@analog.com, stefan.popa@analog.com,
lars@metafoo.de, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
Mircea Caprioru <mircea.caprioru@analog.com>
Subject: [PATCHi V4 2/5] iio: adc: ad7124: Add buffered input support
Date: Tue, 25 Jun 2019 11:11:25 +0300 [thread overview]
Message-ID: <20190625081128.22190-2-mircea.caprioru@analog.com> (raw)
In-Reply-To: <20190625081128.22190-1-mircea.caprioru@analog.com>
This patch adds the option to enable the buffered mode for positive and
negative inputs. Each option can be enabled independently.
In buffered mode, the input channel feeds into a high impedance input stage
of the buffer amplifier. Therefore, the input can tolerate significant
source impedances and is tailored for direct connection to external
resistive type sensors such as strain gages or RTDs.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
---
Changelog v2:
- nothing changed here
Changelog v3:
- nothing changed here
Changelog v4:
- nothing changed here
drivers/iio/adc/ad7124.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 810234db9c0d..ab52c5e9ecb1 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -61,6 +61,8 @@
#define AD7124_CONFIG_REF_SEL(x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
#define AD7124_CONFIG_PGA_MSK GENMASK(2, 0)
#define AD7124_CONFIG_PGA(x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
+#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(7, 6)
+#define AD7124_CONFIG_IN_BUFF(x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)
/* AD7124_FILTER_X */
#define AD7124_FILTER_FS_MSK GENMASK(10, 0)
@@ -108,6 +110,8 @@ struct ad7124_chip_info {
struct ad7124_channel_config {
enum ad7124_ref_sel refsel;
bool bipolar;
+ bool buf_positive;
+ bool buf_negative;
unsigned int ain;
unsigned int vref_mv;
unsigned int pga_bits;
@@ -473,6 +477,11 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
else
st->channel_config[channel].refsel = tmp;
+ st->channel_config[channel].buf_positive =
+ of_property_read_bool(child, "adi,buffered-positive");
+ st->channel_config[channel].buf_negative =
+ of_property_read_bool(child, "adi,buffered-negative");
+
*chan = ad7124_channel_template;
chan->address = channel;
chan->scan_index = channel;
@@ -492,7 +501,7 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
static int ad7124_setup(struct ad7124_state *st)
{
unsigned int val, fclk, power_mode;
- int i, ret;
+ int i, ret, tmp;
fclk = clk_get_rate(st->mclk);
if (!fclk)
@@ -525,8 +534,12 @@ static int ad7124_setup(struct ad7124_state *st)
if (ret < 0)
return ret;
+ tmp = (st->channel_config[i].buf_positive << 1) +
+ st->channel_config[i].buf_negative;
+
val = AD7124_CONFIG_BIPOLAR(st->channel_config[i].bipolar) |
- AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel);
+ AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel) |
+ AD7124_CONFIG_IN_BUFF(tmp);
ret = ad_sd_write_reg(&st->sd, AD7124_CONFIG(i), 2, val);
if (ret < 0)
return ret;
--
2.17.1
next prev parent reply other threads:[~2019-06-25 8:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-25 8:11 [PATCH V4 1/5] iio: adc: ad7124: Remove input number limitation Mircea Caprioru
2019-06-25 8:11 ` Mircea Caprioru [this message]
2019-06-26 19:24 ` [PATCHi V4 2/5] iio: adc: ad7124: Add buffered input support Jonathan Cameron
2019-06-25 8:11 ` [PATCH V4 3/5] iio: adc: ad7124: Shift to dynamic allocation for channel configuration Mircea Caprioru
2019-06-26 19:25 ` Jonathan Cameron
2019-06-25 8:11 ` [PATCH V4 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML Mircea Caprioru
2019-06-26 14:44 ` Rob Herring
2019-06-26 19:34 ` Jonathan Cameron
2019-06-26 19:57 ` Rob Herring
2019-06-25 8:11 ` [PATCH V4 5/5] dt-bindings: iio: adc: Add buffered input property Mircea Caprioru
2019-06-26 14:45 ` Rob Herring
2019-06-26 19:34 ` Jonathan Cameron
2019-06-26 19:22 ` [PATCH V4 1/5] iio: adc: ad7124: Remove input number limitation Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190625081128.22190-2-mircea.caprioru@analog.com \
--to=mircea.caprioru@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=stefan.popa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).