From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jitao Shi Subject: [v3 1/4] dt-bindngs: display: panel: Add BOE tv101wum-n16 panel bindings Date: Wed, 26 Jun 2019 10:53:57 +0800 Message-ID: <20190626025400.109567-2-jitao.shi@mediatek.com> References: <20190626025400.109567-1-jitao.shi@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: In-Reply-To: <20190626025400.109567-1-jitao.shi@mediatek.com> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , linux-pwm@vger.kernel.org, David Airlie , Matthias Brugger Cc: Jitao Shi , Thierry Reding , Ajay Kumar , Inki Dae , Rahul Sharma , Sean Paul , Vincent Palatin , Andy Yan , Philipp Zabel , Russell King , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com, Sascha Hauer , yingjoe.chen@mediatek.com, eddie.huang@mediatek.com, cawa.cheng@mediatek.com, bibby.hsieh@mediatek.com, ck.hu@mediate List-Id: devicetree@vger.kernel.org Add documentation for boe tv101wum-n16 panel. Signed-off-by: Jitao Shi --- .../display/panel/boe,tv101wum-nl6.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt new file mode 100644 index 000000000000..bd44af636390 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt @@ -0,0 +1,34 @@ +Boe Corporation 10.1" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "boe,tv101wum-nl6" +- reg: the virtual channel number of a DSI peripheral +- enable-gpios: a GPIO spec for the enable pin +- pp1800-supply: core voltage supply +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage +- backlight: phandle of the backlight device attached to the panel + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + panel@0 { + compatible = "boe,tv101wum-nl6"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; -- 2.21.0