From: Jonathan Cameron <jic23@kernel.org>
To: Mircea Caprioru <mircea.caprioru@analog.com>
Cc: Michael.Hennerich@analog.com, stefan.popa@analog.com,
lars@metafoo.de, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org
Subject: Re: [PATCHi V4 2/5] iio: adc: ad7124: Add buffered input support
Date: Wed, 26 Jun 2019 20:24:53 +0100 [thread overview]
Message-ID: <20190626202453.723aded1@archlinux> (raw)
In-Reply-To: <20190625081128.22190-2-mircea.caprioru@analog.com>
On Tue, 25 Jun 2019 11:11:25 +0300
Mircea Caprioru <mircea.caprioru@analog.com> wrote:
> This patch adds the option to enable the buffered mode for positive and
> negative inputs. Each option can be enabled independently.
>
> In buffered mode, the input channel feeds into a high impedance input stage
> of the buffer amplifier. Therefore, the input can tolerate significant
> source impedances and is tailored for direct connection to external
> resistive type sensors such as strain gages or RTDs.
>
> Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Applied.
Thanks,
Jonathan
> ---
>
> Changelog v2:
> - nothing changed here
>
> Changelog v3:
> - nothing changed here
>
> Changelog v4:
> - nothing changed here
>
> drivers/iio/adc/ad7124.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
> index 810234db9c0d..ab52c5e9ecb1 100644
> --- a/drivers/iio/adc/ad7124.c
> +++ b/drivers/iio/adc/ad7124.c
> @@ -61,6 +61,8 @@
> #define AD7124_CONFIG_REF_SEL(x) FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
> #define AD7124_CONFIG_PGA_MSK GENMASK(2, 0)
> #define AD7124_CONFIG_PGA(x) FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
> +#define AD7124_CONFIG_IN_BUFF_MSK GENMASK(7, 6)
> +#define AD7124_CONFIG_IN_BUFF(x) FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)
>
> /* AD7124_FILTER_X */
> #define AD7124_FILTER_FS_MSK GENMASK(10, 0)
> @@ -108,6 +110,8 @@ struct ad7124_chip_info {
> struct ad7124_channel_config {
> enum ad7124_ref_sel refsel;
> bool bipolar;
> + bool buf_positive;
> + bool buf_negative;
> unsigned int ain;
> unsigned int vref_mv;
> unsigned int pga_bits;
> @@ -473,6 +477,11 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
> else
> st->channel_config[channel].refsel = tmp;
>
> + st->channel_config[channel].buf_positive =
> + of_property_read_bool(child, "adi,buffered-positive");
> + st->channel_config[channel].buf_negative =
> + of_property_read_bool(child, "adi,buffered-negative");
> +
> *chan = ad7124_channel_template;
> chan->address = channel;
> chan->scan_index = channel;
> @@ -492,7 +501,7 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
> static int ad7124_setup(struct ad7124_state *st)
> {
> unsigned int val, fclk, power_mode;
> - int i, ret;
> + int i, ret, tmp;
>
> fclk = clk_get_rate(st->mclk);
> if (!fclk)
> @@ -525,8 +534,12 @@ static int ad7124_setup(struct ad7124_state *st)
> if (ret < 0)
> return ret;
>
> + tmp = (st->channel_config[i].buf_positive << 1) +
> + st->channel_config[i].buf_negative;
> +
> val = AD7124_CONFIG_BIPOLAR(st->channel_config[i].bipolar) |
> - AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel);
> + AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel) |
> + AD7124_CONFIG_IN_BUFF(tmp);
> ret = ad_sd_write_reg(&st->sd, AD7124_CONFIG(i), 2, val);
> if (ret < 0)
> return ret;
next prev parent reply other threads:[~2019-06-26 19:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-25 8:11 [PATCH V4 1/5] iio: adc: ad7124: Remove input number limitation Mircea Caprioru
2019-06-25 8:11 ` [PATCHi V4 2/5] iio: adc: ad7124: Add buffered input support Mircea Caprioru
2019-06-26 19:24 ` Jonathan Cameron [this message]
2019-06-25 8:11 ` [PATCH V4 3/5] iio: adc: ad7124: Shift to dynamic allocation for channel configuration Mircea Caprioru
2019-06-26 19:25 ` Jonathan Cameron
2019-06-25 8:11 ` [PATCH V4 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML Mircea Caprioru
2019-06-26 14:44 ` Rob Herring
2019-06-26 19:34 ` Jonathan Cameron
2019-06-26 19:57 ` Rob Herring
2019-06-25 8:11 ` [PATCH V4 5/5] dt-bindings: iio: adc: Add buffered input property Mircea Caprioru
2019-06-26 14:45 ` Rob Herring
2019-06-26 19:34 ` Jonathan Cameron
2019-06-26 19:22 ` [PATCH V4 1/5] iio: adc: ad7124: Remove input number limitation Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190626202453.723aded1@archlinux \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mircea.caprioru@analog.com \
--cc=robh+dt@kernel.org \
--cc=stefan.popa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).