* [PATCH AUTOSEL 4.19 21/60] dt-bindings: can: mcp251x: add mcp25625 support
[not found] <20190627003616.20767-1-sashal@kernel.org>
@ 2019-06-27 0:35 ` Sasha Levin
2019-06-27 0:35 ` [PATCH AUTOSEL 4.19 29/60] ARM: dts: am335x phytec boards: Fix cd-gpios active level Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2019-06-27 0:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sean Nyekjaer, Marc Kleine-Budde, Sasha Levin, linux-can, netdev,
devicetree
From: Sean Nyekjaer <sean@geanix.com>
[ Upstream commit 0df82dcd55832a99363ab7f9fab954fcacdac3ae ]
Fully compatible with mcp2515, the mcp25625 have integrated transceiver.
This patch add the mcp25625 to the device tree bindings documentation.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
index 188c8bd4eb67..5a0111d4de58 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Should be one of the following:
- "microchip,mcp2510" for MCP2510.
- "microchip,mcp2515" for MCP2515.
+ - "microchip,mcp25625" for MCP25625.
- reg: SPI chip select.
- clocks: The clock feeding the CAN controller.
- interrupts: Should contain IRQ line for the CAN controller.
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH AUTOSEL 4.19 29/60] ARM: dts: am335x phytec boards: Fix cd-gpios active level
[not found] <20190627003616.20767-1-sashal@kernel.org>
2019-06-27 0:35 ` [PATCH AUTOSEL 4.19 21/60] dt-bindings: can: mcp251x: add mcp25625 support Sasha Levin
@ 2019-06-27 0:35 ` Sasha Levin
1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2019-06-27 0:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Teresa Remmet, Tony Lindgren, Sasha Levin, linux-omap, devicetree
From: Teresa Remmet <t.remmet@phytec.de>
[ Upstream commit 8a0098c05a272c9a68f6885e09755755b612459c ]
Active level of the mmc1 cd gpio needs to be low instead of high.
Fix PCM-953 and phyBOARD-WEGA.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/am335x-pcm-953.dtsi | 2 +-
arch/arm/boot/dts/am335x-wega.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 1ec8e0d80191..572fbd254690 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -197,7 +197,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 8ce541739b24..83e4fe595e37 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -157,7 +157,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread