[PATCH 4/5] arm64: dts: imx8mm: Remove setting for IMX8MM_CLK_USB_CORE_REF

[jun.li@nxp.com]

From: Li Jun <jun.li@nxp.com>

Since IMX8MM_CLK_USB_CORE_REF is not used at all, so remove the setting
for it.

Signed-off-by: Li Jun <jun.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 232a741..5d691a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -743,10 +743,8 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
 				status = "disabled";
@@ -764,10 +762,8 @@
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
-						  <&clk IMX8MM_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
-							 <&clk IMX8MM_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
 				status = "disabled";
-- 
2.7.4