From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org, Maxime Ripard <maxime.ripard@bootlin.com>
Subject: [PATCH 6/7] dt-bindings: net: Use phy-mode instead of phy-connection-type
Date: Wed, 3 Jul 2019 11:55:12 +0200 [thread overview]
Message-ID: <20190703095513.12340-6-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <20190703095513.12340-1-maxime.ripard@bootlin.com>
When adding support for the DWMAC (and derivatives) bindings,
phy-connection-type was required, even though the previous binding required
the equivalent phy-mode.
Let's fix this by using phy-mode as we should have.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
.../devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml | 4 ++--
.../bindings/net/allwinner,sun8i-a83t-emac.yaml | 8 ++++----
Documentation/devicetree/bindings/net/snps,dwmac.yaml | 4 ++--
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index 4b45798f0e68..06b1cc8bea14 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -44,7 +44,7 @@ required:
- interrupt-names
- clocks
- clock-names
- - phy-connection-type
+ - phy-mode
examples:
- |
@@ -55,7 +55,7 @@ examples:
interrupt-names = "macirq";
clocks = <&ahb_gates 49>, <&gmac_tx>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
- phy-connection-type = "mii";
+ phy-mode = "mii";
};
# FIXME: We should set it, but it would report all the generic
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index 6f68c7f5fc34..d4084c149768 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -52,8 +52,8 @@ required:
- clock-names
- resets
- reset-names
- - phy-connection-type
- phy-handle
+ - phy-mode
- syscon
allOf:
@@ -198,7 +198,7 @@ examples:
clock-names = "stmmaceth";
phy-handle = <&int_mii_phy>;
- phy-connection-type = "mii";
+ phy-mode = "mii";
allwinner,leds-active-low;
mdio1: mdio {
@@ -249,7 +249,7 @@ examples:
clock-names = "stmmaceth";
phy-handle = <&ext_rgmii_phy>;
- phy-connection-type = "rgmii";
+ phy-mode = "rgmii";
allwinner,leds-active-low;
mdio2: mdio {
@@ -301,7 +301,7 @@ examples:
clocks = <&ccu 27>;
clock-names = "stmmaceth";
phy-handle = <&ext_rgmii_phy1>;
- phy-connection-type = "rgmii";
+ phy-mode = "rgmii";
mdio {
compatible = "snps,dwmac-mdio";
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 658726c620be..76fea2be66ac 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -261,7 +261,7 @@ required:
- reg
- interrupts
- interrupt-names
- - phy-connection-type
+ - phy-mode
dependencies:
snps,reset-active-low: ["snps,reset-gpio"]
@@ -384,7 +384,7 @@ examples:
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
mac-address = [000000000000]; /* Filled in by U-Boot */
max-frame-size = <3800>;
- phy-connection-type = "gmii";
+ phy-mode = "gmii";
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
rx-fifo-depth = <16384>;
--
2.21.0
next prev parent reply other threads:[~2019-07-03 9:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-03 9:55 [PATCH 1/7] dt-bindings: net: mdio: Add a nodename pattern Maxime Ripard
2019-07-03 9:55 ` [PATCH 2/7] dt-bindings: net: mdio: Add address and size cells Maxime Ripard
2019-07-03 9:55 ` [PATCH 3/7] dt-bindings: net: mdio: Add child nodes Maxime Ripard
2019-07-03 13:53 ` Rob Herring
2019-07-03 14:13 ` Maxime Ripard
2019-07-03 14:20 ` Rob Herring
2019-07-03 19:57 ` Maxime Ripard
2019-07-03 20:14 ` Rob Herring
2019-07-03 9:55 ` [PATCH 4/7] dt-bindings: display: Fix simple-framebuffer example Maxime Ripard
2019-07-03 9:55 ` [PATCH 5/7] dt-bindings: simple-framebuffer: Add requirement for pipelines Maxime Ripard
2019-07-03 9:55 ` Maxime Ripard [this message]
2019-07-03 9:55 ` [PATCH 7/7] dt-bindings: usb: ehci: Fix example warnings Maxime Ripard
2019-07-03 19:29 ` [PATCH 1/7] dt-bindings: net: mdio: Add a nodename pattern Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190703095513.12340-6-maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).