From: Aleix Roca Nonell <kernelrocks@gmail.com>
To: "Andreas Färber" <afaerber@suse.de>,
"Rob Herring" <robh+dt@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jason Cooper" <jason@lakedaemon.net>,
"Marc Zyngier" <marc.zyngier@arm.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] arm64: dts: realtek: Add bpi-w2 board support and its RTD1296 SoC
Date: Sun, 7 Jul 2019 15:23:51 +0200 [thread overview]
Message-ID: <20190707132351.GG13340@arks.localdomain> (raw)
Add basic device tree description for the Bannana Pi W2 (bpi-w2) and its
SoC. The board should be able to boot up to a ram based rootfs.
The only information available on the memreserve areas are the macro
names holing the addresses in the original source code:
- 0x00000000 0x00100000 - apparently used to fix an undefined bug
- 0x02600000 0x00c00000 - ION_AUDIO_HEAP
- 0x03200000 0x0b800000 - ION_MEDIA_HEAP 1
- 0x10000000 0x00014000 - ACPU_IDMEM
- 0x14200000 0x09200000 - ION_MEDIA_HEAP 2
The CPUs still lack the enable-method property "rtk-spin-table" as
previously noted in [1].
[1] - commit 72a7786c0a0d65 ("ARM64: dts: Add Realtek RTD1295 and Zidoo X9S")
Signed-off-by: Aleix Roca Nonell <kernelrocks@gmail.com>
---
arch/arm64/boot/dts/realtek/Makefile | 1 +
.../dts/realtek/rtd1296-bananapi-bpi-w2.dts | 27 +++++++
arch/arm64/boot/dts/realtek/rtd1296.dtsi | 77 +++++++++++++++++++
3 files changed, 105 insertions(+)
create mode 100644 arch/arm64/boot/dts/realtek/rtd1296-bananapi-bpi-w2.dts
create mode 100644 arch/arm64/boot/dts/realtek/rtd1296.dtsi
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
index 90c897ac3f7a..c1a6654e7d5b 100644
--- a/arch/arm64/boot/dts/realtek/Makefile
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -2,3 +2,4 @@
dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-bananapi-bpi-w2.dtb
diff --git a/arch/arm64/boot/dts/realtek/rtd1296-bananapi-bpi-w2.dts b/arch/arm64/boot/dts/realtek/rtd1296-bananapi-bpi-w2.dts
new file mode 100644
index 000000000000..1a81b9f2c3c3
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1296-bananapi-bpi-w2.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "rtd1296.dtsi"
+
+/ {
+ model = "Banana Pi BPI-W2";
+ compatible = "bananapi,bpi-w2", "realtek,rtd1296";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0x98007800";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0x80000000>; /* 2048 MB */
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
new file mode 100644
index 000000000000..f7a5f3b9698c
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+// extension because of bug reported in realtek's source code
+/memreserve/ 0x00000000 0x00100000;
+
+/memreserve/ 0x02600000 0x00c00000;
+/memreserve/ 0x03200000 0x0b800000;
+/memreserve/ 0x10000000 0x00014000;
+/memreserve/ 0x14200000 0x09200000;
+
+#include "rtd129x.dtsi"
+
+/ {
+ compatible = "realtek,rtd1296";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ A53_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ cpu-release-addr = <0x0 0x9801AA44>;
+ next-level-cache = <&a53_l2>;
+ };
+
+ A53_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x1>;
+ cpu-release-addr = <0x0 0x9801AA44>;
+ next-level-cache = <&a53_l2>;
+ };
+
+ A53_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x02>;
+ cpu-release-addr = <0x0 0x9801AA44>;
+ next-level-cache = <&a53_l2>;
+ };
+
+ A53_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x03>;
+ cpu-release-addr = <0x0 0x9801AA44>;
+ next-level-cache = <&a53_l2>;
+ };
+
+ a53_l2: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x98000000 0x70000>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ ranges;
+ };
+
+ arch_timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <27000000>;
+ };
+};
--
2.21.0
reply other threads:[~2019-07-07 13:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190707132351.GG13340@arks.localdomain \
--to=kernelrocks@gmail.com \
--cc=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox