[PATCH v4 0/2] Amazon's Annapurna Labs Fabric Interrupt Controller

[PATCH v4 0/2] Amazon's Annapurna Labs Fabric Interrupt Controller

[Talel Shenhar]

This series introduces support for Amazon's Annapurna Labs Fabric Interrupt
Controller.

The Amazon's Annapurna Labs FIC (Fabric Interrupt Controller) has 32
inputs/sources. This FIC may be cascaded into another FIC or connected
directly to the main CPU Interrupt Controller (e.g. GIC).

Changes since v3:
=================
- tightened the verification for supported trigger types
- updated dt-binding's example to meet the binding description
  (interrupt-cells to 2)
- added description to interrupt-cells to explain each field
- changed pr_err to pr_debug inside al_fic_irq_set_type in order to allow
  the user to enable printouts for verbose information in case of errors

Changes since v2:
=================
- updated dt-bindings to use proper format for entry name
- removed kernel-doc format style from Copyright
- removed unneeded/misplaced selects from Kconfig
- changed used mmio operation to relaxed flavor
- changed error return value from EPERM to EINVAL int case of attempting to
  reconfigure the FIC after it has been configured
- fixed commenting format
- used drivers define instead of subsystem internals
- moved al_fic_hw_init function to caller
- removed al_fic_wire_get_domain from documentation
- removed argument validation from al_fic_wire_init

Changes since v1:
=================
- removing unused exported APIs
- updating cover letter and commit message accordingly



Talel Shenhar (2):
  dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC
  irqchip: al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt
    Controller Driver

 .../interrupt-controller/amazon,al-fic.txt         |  29 +++
 MAINTAINERS                                        |   6 +
 drivers/irqchip/Kconfig                            |   8 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-al-fic.c                       | 278 +++++++++++++++++++++
 5 files changed, 322 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
 create mode 100644 drivers/irqchip/irq-al-fic.c

-- 
2.7.4

[PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Talel Shenhar]

Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding.

Signed-off-by: Talel Shenhar <talel@amazon.com>
---
 .../interrupt-controller/amazon,al-fic.txt         | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
new file mode 100644
index 0000000..4e82fd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
@@ -0,0 +1,29 @@
+Amazon's Annapurna Labs Fabric Interrupt Controller
+
+Required properties:
+
+- compatible: should be "amazon,al-fic"
+- reg: physical base address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: must be 2.
+  First cell defines the index of the interrupt within the controller.
+  Second cell is used to specify the trigger type and must be one of the
+  following:
+    - bits[3:0] trigger type and level flags
+	1 = low-to-high edge triggered
+	4 = active high level-sensitive
+- interrupt-parent: specifies the parent interrupt controller.
+- interrupts: describes which input line in the interrupt parent, this
+  fic's output is connected to. This field property depends on the parent's
+  binding
+
+Example:
+
+amazon_fic: interrupt-controller@0xfd8a8500 {
+	compatible = "amazon,al-fic";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x0 0xfd8a8500 0x0 0x1000>;
+	interrupt-parent = <&gic>;
+	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
+};
-- 
2.7.4

Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Marc Zyngier]

On 10/06/2019 09:34, Talel Shenhar wrote:
> Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding.
> 
> Signed-off-by: Talel Shenhar <talel@amazon.com>
> ---
>  .../interrupt-controller/amazon,al-fic.txt         | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> new file mode 100644
> index 0000000..4e82fd5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> @@ -0,0 +1,29 @@
> +Amazon's Annapurna Labs Fabric Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: should be "amazon,al-fic"
> +- reg: physical base address and size of the registers
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: must be 2.
> +  First cell defines the index of the interrupt within the controller.
> +  Second cell is used to specify the trigger type and must be one of the
> +  following:
> +    - bits[3:0] trigger type and level flags
> +	1 = low-to-high edge triggered
> +	4 = active high level-sensitive
> +- interrupt-parent: specifies the parent interrupt controller.
> +- interrupts: describes which input line in the interrupt parent, this
> +  fic's output is connected to. This field property depends on the parent's
> +  binding
> +
> +Example:
> +
> +amazon_fic: interrupt-controller@0xfd8a8500 {
> +	compatible = "amazon,al-fic";
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +	reg = <0x0 0xfd8a8500 0x0 0x1000>;
> +	interrupt-parent = <&gic>;
> +	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
> +};
> 

Rob, are you OK with this DT binding?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Rob Herring]

On Mon, Jun 10, 2019 at 11:34:42AM +0300, Talel Shenhar wrote:
> Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding.
> 
> Signed-off-by: Talel Shenhar <talel@amazon.com>
> ---
>  .../interrupt-controller/amazon,al-fic.txt         | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> new file mode 100644
> index 0000000..4e82fd5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> @@ -0,0 +1,29 @@
> +Amazon's Annapurna Labs Fabric Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: should be "amazon,al-fic"
> +- reg: physical base address and size of the registers
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: must be 2.
> +  First cell defines the index of the interrupt within the controller.
> +  Second cell is used to specify the trigger type and must be one of the
> +  following:
> +    - bits[3:0] trigger type and level flags
> +	1 = low-to-high edge triggered
> +	4 = active high level-sensitive

No need to define this here. Reference the standard definition.

> +- interrupt-parent: specifies the parent interrupt controller.

Drop this. It is implied and could be in the parent.

> +- interrupts: describes which input line in the interrupt parent, this
> +  fic's output is connected to. This field property depends on the parent's
> +  binding
> +
> +Example:
> +
> +amazon_fic: interrupt-controller@0xfd8a8500 {

Drop the '0x'

> +	compatible = "amazon,al-fic";
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +	reg = <0x0 0xfd8a8500 0x0 0x1000>;
> +	interrupt-parent = <&gic>;
> +	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
> +};
> -- 
> 2.7.4
> 

Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Shenhar, Talel]

Marc, should I publish those fixes as new patch that updates the 
dt-bindings or new patchset to this list?

On 7/9/2019 5:23 AM, Rob Herring wrote:
> On Mon, Jun 10, 2019 at 11:34:42AM +0300, Talel Shenhar wrote:
>> +- #interrupt-cells: must be 2.
>> +  First cell defines the index of the interrupt within the controller.
>> +  Second cell is used to specify the trigger type and must be one of the
>> +  following:
>> +    - bits[3:0] trigger type and level flags
>> +	1 = low-to-high edge triggered
>> +	4 = active high level-sensitive
> No need to define this here. Reference the standard definition.

This device only support those two modes.

This definition tries to capture the supported modes.

Should I just state that those two modes are supported and then avoid 
the actual bits and values?

>
>> +- interrupt-parent: specifies the parent interrupt controller.
> Drop this. It is implied and could be in the parent.
ack
>
>> +- interrupts: describes which input line in the interrupt parent, this
>> +  fic's output is connected to. This field property depends on the parent's
>> +  binding
>> +
>> +Example:
>> +
>> +amazon_fic: interrupt-controller@0xfd8a8500 {
> Drop the '0x'
ack

Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Marc Zyngier]

On 09/07/2019 06:59, Shenhar, Talel wrote:
> Marc, should I publish those fixes as new patch that updates the 
> dt-bindings or new patchset to this list?


If you are going to update the binding, please submit a patch on top of
mainline, as it's been merged already.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Shenhar, Talel]

Thanks, will do.

On 7/9/2019 11:15 AM, Marc Zyngier wrote:
> On 09/07/2019 06:59, Shenhar, Talel wrote:
>> Marc, should I publish those fixes as new patch that updates the
>> dt-bindings or new patchset to this list?
>
> If you are going to update the binding, please submit a patch on top of
> mainline, as it's been merged already.
>
> Thanks,
>
> 	M.

Re: [PATCH v4 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Rob Herring]

On Tue, Jul 9, 2019 at 12:00 AM Shenhar, Talel <talel@amazon.com> wrote:
>
> Marc, should I publish those fixes as new patch that updates the
> dt-bindings or new patchset to this list?
>
> On 7/9/2019 5:23 AM, Rob Herring wrote:
> > On Mon, Jun 10, 2019 at 11:34:42AM +0300, Talel Shenhar wrote:
> >> +- #interrupt-cells: must be 2.
> >> +  First cell defines the index of the interrupt within the controller.
> >> +  Second cell is used to specify the trigger type and must be one of the
> >> +  following:
> >> +    - bits[3:0] trigger type and level flags
> >> +    1 = low-to-high edge triggered
> >> +    4 = active high level-sensitive
> > No need to define this here. Reference the standard definition.
>
> This device only support those two modes.
>
> This definition tries to capture the supported modes.
>
> Should I just state that those two modes are supported and then avoid
> the actual bits and values?

Yes.

Rob

[PATCH v4 2/2] irqchip: al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver

[Talel Shenhar]

The Amazon's Annapurna Labs Fabric Interrupt Controller has 32 inputs.
A FIC (Fabric Interrupt Controller) may be cascaded into another FIC or
directly to the main CPU Interrupt Controller (e.g. GIC).

Signed-off-by: Talel Shenhar <talel@amazon.com>
---
 MAINTAINERS                  |   6 +
 drivers/irqchip/Kconfig      |   8 ++
 drivers/irqchip/Makefile     |   1 +
 drivers/irqchip/irq-al-fic.c | 278 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 293 insertions(+)
 create mode 100644 drivers/irqchip/irq-al-fic.c

diff --git a/MAINTAINERS b/MAINTAINERS
index f485597..b4f5255 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1209,6 +1209,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
 F:	drivers/irqchip/irq-vic.c
 
+AMAZON ANNAPURNA LABS FIC DRIVER
+M:	Talel Shenhar <talel@amazon.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
+F:	drivers/irqchip/irq-al-fic.c
+
 ARM SMMU DRIVERS
 M:	Will Deacon <will.deacon@arm.com>
 R:	Robin Murphy <robin.murphy@arm.com>
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 51a5ef0..7237892 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -89,6 +89,14 @@ config ALPINE_MSI
 	select PCI_MSI
 	select GENERIC_IRQ_CHIP
 
+config AL_FIC
+	bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
+	depends on OF || COMPILE_TEST
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	help
+	  Support Amazon's Annapurna Labs Fabric Interrupt Controller.
+
 config ATMEL_AIC_IRQ
 	bool
 	select GENERIC_IRQ_CHIP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 794c13d..a20eba5 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_IRQCHIP)			+= irqchip.o
 
+obj-$(CONFIG_AL_FIC)			+= irq-al-fic.o
 obj-$(CONFIG_ALPINE_MSI)		+= irq-alpine-msi.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-cpu.o
 obj-$(CONFIG_ATH79)			+= irq-ath79-misc.o
diff --git a/drivers/irqchip/irq-al-fic.c b/drivers/irqchip/irq-al-fic.c
new file mode 100644
index 0000000..1a57cee
--- /dev/null
+++ b/drivers/irqchip/irq-al-fic.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+/* FIC Registers */
+#define AL_FIC_CAUSE		0x00
+#define AL_FIC_MASK		0x10
+#define AL_FIC_CONTROL		0x28
+
+#define CONTROL_TRIGGER_RISING	BIT(3)
+#define CONTROL_MASK_MSI_X	BIT(5)
+
+#define NR_FIC_IRQS 32
+
+MODULE_AUTHOR("Talel Shenhar");
+MODULE_DESCRIPTION("Amazon's Annapurna Labs Interrupt Controller Driver");
+MODULE_LICENSE("GPL v2");
+
+enum al_fic_state {
+	AL_FIC_UNCONFIGURED = 0,
+	AL_FIC_CONFIGURED_LEVEL,
+	AL_FIC_CONFIGURED_RISING_EDGE,
+};
+
+struct al_fic {
+	void __iomem *base;
+	struct irq_domain *domain;
+	const char *name;
+	unsigned int parent_irq;
+	enum al_fic_state state;
+};
+
+static void al_fic_set_trigger(struct al_fic *fic,
+			       struct irq_chip_generic *gc,
+			       enum al_fic_state new_state)
+{
+	irq_flow_handler_t handler;
+	u32 control = readl_relaxed(fic->base + AL_FIC_CONTROL);
+
+	if (new_state == AL_FIC_CONFIGURED_LEVEL) {
+		handler = handle_level_irq;
+		control &= ~CONTROL_TRIGGER_RISING;
+	} else {
+		handler = handle_edge_irq;
+		control |= CONTROL_TRIGGER_RISING;
+	}
+	gc->chip_types->handler = handler;
+	fic->state = new_state;
+	writel_relaxed(control, fic->base + AL_FIC_CONTROL);
+}
+
+static int al_fic_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	struct al_fic *fic = gc->private;
+	enum al_fic_state new_state;
+	int ret = 0;
+
+	irq_gc_lock(gc);
+
+	if (((flow_type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_HIGH) &&
+	    ((flow_type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_EDGE_RISING)) {
+		pr_debug("fic doesn't support flow type %d\n", flow_type);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	new_state = (flow_type & IRQ_TYPE_LEVEL_HIGH) ?
+		AL_FIC_CONFIGURED_LEVEL : AL_FIC_CONFIGURED_RISING_EDGE;
+
+	/*
+	 * A given FIC instance can be either all level or all edge triggered.
+	 * This is generally fixed depending on what pieces of HW it's wired up
+	 * to.
+	 *
+	 * We configure it based on the sensitivity of the first source
+	 * being setup, and reject any subsequent attempt at configuring it in a
+	 * different way.
+	 */
+	if (fic->state == AL_FIC_UNCONFIGURED) {
+		al_fic_set_trigger(fic, gc, new_state);
+	} else if (fic->state != new_state) {
+		pr_debug("fic %s state already configured to %d\n",
+			 fic->name, fic->state);
+		ret = -EINVAL;
+		goto err;
+	}
+
+err:
+	irq_gc_unlock(gc);
+
+	return ret;
+}
+
+static void al_fic_irq_handler(struct irq_desc *desc)
+{
+	struct al_fic *fic = irq_desc_get_handler_data(desc);
+	struct irq_domain *domain = fic->domain;
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
+	unsigned long pending;
+	unsigned int irq;
+	u32 hwirq;
+
+	chained_irq_enter(irqchip, desc);
+
+	pending = readl_relaxed(fic->base + AL_FIC_CAUSE);
+	pending &= ~gc->mask_cache;
+
+	for_each_set_bit(hwirq, &pending, NR_FIC_IRQS) {
+		irq = irq_find_mapping(domain, hwirq);
+		generic_handle_irq(irq);
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static int al_fic_register(struct device_node *node,
+			   struct al_fic *fic)
+{
+	struct irq_chip_generic *gc;
+	int ret;
+
+	fic->domain = irq_domain_add_linear(node,
+					    NR_FIC_IRQS,
+					    &irq_generic_chip_ops,
+					    fic);
+	if (!fic->domain) {
+		pr_err("fail to add irq domain\n");
+		return -ENOMEM;
+	}
+
+	ret = irq_alloc_domain_generic_chips(fic->domain,
+					     NR_FIC_IRQS,
+					     1, fic->name,
+					     handle_level_irq,
+					     0, 0, IRQ_GC_INIT_MASK_CACHE);
+	if (ret) {
+		pr_err("fail to allocate generic chip (%d)\n", ret);
+		goto err_domain_remove;
+	}
+
+	gc = irq_get_domain_generic_chip(fic->domain, 0);
+	gc->reg_base = fic->base;
+	gc->chip_types->regs.mask = AL_FIC_MASK;
+	gc->chip_types->regs.ack = AL_FIC_CAUSE;
+	gc->chip_types->chip.irq_mask = irq_gc_mask_set_bit;
+	gc->chip_types->chip.irq_unmask = irq_gc_mask_clr_bit;
+	gc->chip_types->chip.irq_ack = irq_gc_ack_clr_bit;
+	gc->chip_types->chip.irq_set_type = al_fic_irq_set_type;
+	gc->chip_types->chip.flags = IRQCHIP_SKIP_SET_WAKE;
+	gc->private = fic;
+
+	irq_set_chained_handler_and_data(fic->parent_irq,
+					 al_fic_irq_handler,
+					 fic);
+	return 0;
+
+err_domain_remove:
+	irq_domain_remove(fic->domain);
+
+	return ret;
+}
+
+/*
+ * al_fic_wire_init() - initialize and configure fic in wire mode
+ * @of_node: optional pointer to interrupt controller's device tree node.
+ * @base: mmio to fic register
+ * @name: name of the fic
+ * @parent_irq: interrupt of parent
+ *
+ * This API will configure the fic hardware to to work in wire mode.
+ * In wire mode, fic hardware is generating a wire ("wired") interrupt.
+ * Interrupt can be generated based on positive edge or level - configuration is
+ * to be determined based on connected hardware to this fic.
+ */
+static struct al_fic *al_fic_wire_init(struct device_node *node,
+				       void __iomem *base,
+				       const char *name,
+				       unsigned int parent_irq)
+{
+	struct al_fic *fic;
+	int ret;
+	u32 control = CONTROL_MASK_MSI_X;
+
+	fic = kzalloc(sizeof(*fic), GFP_KERNEL);
+	if (!fic)
+		return ERR_PTR(-ENOMEM);
+
+	fic->base = base;
+	fic->parent_irq = parent_irq;
+	fic->name = name;
+
+	/* mask out all interrupts */
+	writel_relaxed(0xFFFFFFFF, fic->base + AL_FIC_MASK);
+
+	/* clear any pending interrupt */
+	writel_relaxed(0, fic->base + AL_FIC_CAUSE);
+
+	writel_relaxed(control, fic->base + AL_FIC_CONTROL);
+
+	ret = al_fic_register(node, fic);
+	if (ret) {
+		pr_err("fail to register irqchip\n");
+		goto err_free;
+	}
+
+	pr_debug("%s initialized successfully in Legacy mode (parent-irq=%u)\n",
+		 fic->name, parent_irq);
+
+	return fic;
+
+err_free:
+	kfree(fic);
+	return ERR_PTR(ret);
+}
+
+static int __init al_fic_init_dt(struct device_node *node,
+				 struct device_node *parent)
+{
+	int ret;
+	void __iomem *base;
+	unsigned int parent_irq;
+	struct al_fic *fic;
+
+	if (!parent) {
+		pr_err("%s: unsupported - device require a parent\n",
+		       node->name);
+		return -EINVAL;
+	}
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s: fail to map memory\n", node->name);
+		return -ENOMEM;
+	}
+
+	parent_irq = irq_of_parse_and_map(node, 0);
+	if (!parent_irq) {
+		pr_err("%s: fail to map irq\n", node->name);
+		ret = -EINVAL;
+		goto err_unmap;
+	}
+
+	fic = al_fic_wire_init(node,
+			       base,
+			       node->name,
+			       parent_irq);
+	if (IS_ERR(fic)) {
+		pr_err("%s: fail to initialize irqchip (%lu)\n",
+		       node->name,
+		       PTR_ERR(fic));
+		ret = PTR_ERR(fic);
+		goto err_irq_dispose;
+	}
+
+	return 0;
+
+err_irq_dispose:
+	irq_dispose_mapping(parent_irq);
+err_unmap:
+	iounmap(base);
+
+	return ret;
+}
+
+IRQCHIP_DECLARE(al_fic, "amazon,al-fic", al_fic_init_dt);
-- 
2.7.4