devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Oliver Graute <oliver.graute@gmail.com>
Cc: narmstrong@baylibre.com, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard
Date: Wed, 17 Jul 2019 17:05:18 +0800	[thread overview]
Message-ID: <20190717090517.GF3738@dragon> (raw)
In-Reply-To: <1561398017-10548-3-git-send-email-oliver.graute@gmail.com>

On Mon, Jun 24, 2019 at 07:40:13PM +0200, Oliver Graute wrote:
> This patch adds DeviceTree Source for the i.MX6 UltraLite DART NAND/WIFI
> 
> Signed-off-by: Oliver Graute <oliver.graute@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile                      |   1 +
>  arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 203 ++++++++++++++++++++++++
>  2 files changed, 204 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c4742af..5dc3fbf 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-tx6ul-0010.dtb \
>  	imx6ul-tx6ul-0011.dtb \
>  	imx6ul-tx6ul-mainboard.dtb \
> +	imx6ul-var-6ulcustomboard.dtb \
>  	imx6ull-14x14-evk.dtb \
>  	imx6ull-colibri-eval-v3.dtb \
>  	imx6ull-colibri-wifi-eval-v3.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> new file mode 100644
> index 0000000..59354e6
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> @@ -0,0 +1,203 @@
> +// SPDX-License-Identifier: (GPL-2.0)
> +/*
> + * Support for Variscite DART-6UL Module
> + *
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com
> + * Copyright (C) 2018-2019 Oliver Graute <oliver.graute@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx6ul-imx6ull-var-dart-common.dtsi"
> +
> +/ {
> +	model = "Variscite i.MX6 UltraLite Carrier-board";
> +	compatible = "fsl,6ulcustomboard", "fsl,imx6ul";

The board compatible is documented?

> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 20000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		user {
> +			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_BACK>;
> +			gpio-key,wakeup;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		d16-led {
> +			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "wm8731audio";
> +		simple-audio-card,widgets =
> +			"Headphone", "Headphone Jack",
> +			"Line", "Line Jack",
> +			"Microphone", "Mic Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "RHPOUT",
> +			"Headphone Jack", "LHPOUT",
> +			"LLINEIN", "Line Jack",
> +			"RLINEIN", "Line Jack",
> +			"MICIN", "Mic Bias",
> +			"Mic Bias", "Mic Jack";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,bitclock-master = <&sound_master>;
> +		simple-audio-card,frame-master = <&sound_master>;
> +
> +		sound_master: simple-audio-card,cpu {
> +				sound-dai = <&sai2>;
> +		};
> +	};
> +};
> +
> +&can1 {
> +	status = "okay";
> +};
> +
> +&can2 {
> +	status = "okay";
> +};
> +
> +&gpc {
> +	fsl,cpu_pupscr_sw2iso = <0x2>;
> +	fsl,cpu_pupscr_sw = <0x1>;
> +	fsl,cpu_pdnscr_iso2sw = <0x1>;
> +	fsl,cpu_pdnscr_iso = <0x1>;
> +	fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */

These are not supported by mainline kernel, IIRC.

Shawn

> +};
> +
> +&fec1 {
> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> +	phy-handle = <&ethphy0>;
> +	status = "okay";
> +};
> +
> +&fec2 {
> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> +	phy-handle = <&ethphy1>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock_frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	wm8731: audio-codec@1a {
> +		#sound-dai-cells = <0>;
> +		compatible = "wlf,wm8731";
> +		reg = <0x1a>;
> +		clocks = <&clks IMX6UL_CLK_SAI2>;
> +		clock-names = "mclk";
> +	};
> +
> +	touchscreen@38 {
> +		compatible = "edt,edt-ft5x06";
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <4 0>;
> +		touchscreen-size-x = <800>;
> +		touchscreen-size-y = <480>;
> +		touchscreen-inverted-x;
> +		touchscreen-inverted-y;
> +	};
> +
> +	rtc@68 {
> +		compatible = "dallas,ds1337";
> +		reg = <0x68>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_rtc>;
> +		interrupt-parent = <&gpio5>;
> +		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> +	};
> +};
> +
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif_dat
> +		     &pinctrl_lcdif_ctrl>;
> +	display = <&display0>;
> +	status = "okay";
> +
> +	display0: display0 {
> +		bits-per-pixel = <16>;
> +		bus-width = <24>;
> +
> +		display-timings {
> +			native-mode = <&timing0>;
> +			timing0: timing0 {
> +				clock-frequency =<35000000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hfront-porch = <40>;
> +				hback-porch = <40>;
> +				hsync-len = <48>;
> +				vback-porch = <29>;
> +				vfront-porch = <13>;
> +				vsync-len = <3>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +	};
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_rtc: rtcgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0
> +		>;
> +	};
> +};
> -- 
> 2.7.4
> 

      reply	other threads:[~2019-07-17  9:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-24 17:40 [PATCHv4 0/2] Variscite DART-6UL SoM support Oliver Graute
2019-06-24 17:40 ` [PATCH 1/2] ARM: dts: imx6ul: Add " Oliver Graute
2019-07-17  8:56   ` Shawn Guo
2019-06-24 17:40 ` [PATCH 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard Oliver Graute
2019-07-17  9:05   ` Shawn Guo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190717090517.GF3738@dragon \
    --to=shawnguo@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=narmstrong@baylibre.com \
    --cc=oliver.graute@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).