From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jerome Brunet Subject: [PATCH] ARM: dts: meson8b: add ethernet fifo sizes Date: Thu, 18 Jul 2019 11:36:23 +0200 Message-ID: <20190718093623.23598-1-jbrunet@baylibre.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Kevin Hilman Cc: Jerome Brunet , linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org If unspecified in DT, the fifo sizes are not automatically detected by the dwmac1000 dma driver and the reported fifo sizes default to 0. Because of this, flow control will be turned off on the device. Add the fifo sizes provided by the datasheet in the SoC in DT so flow control may be enabled if necessary. Signed-off-by: Jerome Brunet --- arch/arm/boot/dts/meson8b.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index fba2c70c2fda..b044ad78b475 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -410,6 +410,8 @@ <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; -- 2.21.0