From: andradanciu1997 <andradanciu1997@gmail.com>
To: shawnguo@kernel.org
Cc: robh+dt@kernel.org, mark.rutland@arm.com, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
manivannan.sadhasivam@linaro.org, andrew.smirnov@gmail.com,
Michal.Vokac@ysoft.com, ping.bai@nxp.com,
u.kleine-koenig@pengutronix.de, leoyang.li@nxp.com,
aisheng.dong@nxp.com, l.stach@pengutronix.de,
pankaj.bansal@nxp.com, angus@akkea.ca, pramod.kumar_1@nxp.com,
bhaskar.upadhaya@nxp.com, vabhav.sharma@nxp.com,
andradanciu1997@gmail.com, richard.hu@technexion.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/2] Add basic support for pico-pi-imx8m
Date: Mon, 22 Jul 2019 13:27:28 +0300 [thread overview]
Message-ID: <20190722102730.15763-1-andradanciu1997@gmail.com> (raw)
Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu
Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf
Changes since v5:
- removed comment /* PMIC BD71837 PMIC_nINT GPIO1_IO12 */
- added "Reviewed-by" tags
Changes since v4:
- removed #address-cells and #size-cells from regulators node
Changes since v3:
- renamed pico-pi-8m.dts to imx8mq-pico-pi.dts
- moved iomuxc node as the last one
- removed pinctrl-assert-gpios property from fec1 node
- removed at803x,led-act-blind-workaround, at803x,eee-disabled
properties from mdio node
- added pinctrl-names = "default" to i2c1 node
- changed bd71837 pmic support properties according to
Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
- removed A53_0 node
Changes since v2:
- changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to
technexion,pico-pi-imx8m
- removed bootargs property
- removed regulators node and put fixed regulator directly under root node
- changed node name from usb_otg_vbus to regulator-usb-otg-vbus
- removed pinctrl-names property from iomuxc node
- removed wand-pi-8m container node
- sorted pinctrl nodes alphabetically
- removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream
driver
- changed properties' order in usb_dwc3_1 node
Changes since v1:
- renamed wandboard-pi-8m.dts to pico-pi-8m.dts
- removed pinctrl_csi1, pinctrl_wifi_ctrl
- used generic name for pmic
- removed gpo node
- delete regulator-virtuals node
- remove always-on property from buck1-8 and ldo3-7
- remove pmic-buck-uses-i2c-dvs property for buck1-4
Andra Danciu (1):
dt-bindings: arm: fsl: Add the pico-pi-imx8m board
Richard Hu (1):
arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts | 413 +++++++++++++++++++++++
3 files changed, 415 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
--
2.11.0
next reply other threads:[~2019-07-22 10:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 10:27 andradanciu1997 [this message]
2019-07-22 10:27 ` [PATCH v6 1/2] arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M andradanciu1997
2019-07-22 10:27 ` [PATCH v6 2/2] dt-bindings: arm: fsl: Add the pico-pi-imx8m board andradanciu1997
2019-07-23 8:25 ` [PATCH v6 0/2] Add basic support for pico-pi-imx8m Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190722102730.15763-1-andradanciu1997@gmail.com \
--to=andradanciu1997@gmail.com \
--cc=Michal.Vokac@ysoft.com \
--cc=aisheng.dong@nxp.com \
--cc=andrew.smirnov@gmail.com \
--cc=angus@akkea.ca \
--cc=bhaskar.upadhaya@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mark.rutland@arm.com \
--cc=pankaj.bansal@nxp.com \
--cc=ping.bai@nxp.com \
--cc=pramod.kumar_1@nxp.com \
--cc=richard.hu@technexion.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=vabhav.sharma@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).