devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Lechner <david@lechnology.com>
To: linux-iio@vger.kernel.org, linux-omap@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: "David Lechner" <david@lechnology.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"William Breathitt Gray" <vilhelm.gray@gmail.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org
Subject: [PATCH 0/4] new driver for TI eQEP
Date: Mon, 22 Jul 2019 10:45:34 -0500	[thread overview]
Message-ID: <20190722154538.5314-1-david@lechnology.com> (raw)

This series adds device tree bindings and a new counter driver for the Texas
Instruments Enhanced Quadrature Encoder Pulse (eQEP).

As mentioned in one of the commit messages, to start with, the driver only
supports reading the current counter value and setting the min/max values.
Other features can be added on an as-needed basis.

The only other feature I am interested in is adding is getting time data in
order to calculate the rotational speed of a motor. However, there probably
needs to be a higher level discussion of how this can fit into the counter
subsystem in general first.

This series has been tested on a BeagleBone Blue with the following script:

#!/usr/bin/env python3

from os import path
from time import sleep

COUNTER_PATH = '/sys/bus/counter/devices'
COUNTERS = ['counter0', 'counter1', 'counter2']
COUNT0 = 'count0'
COUNT = 'count'
CEILING = 'ceiling'
FLOOR = 'floor'
ENABLE = 'enable'

cnts = []

for c in COUNTERS:
    enable_path = path.join(COUNTER_PATH, c, COUNT0, ENABLE)
    with open(enable_path, 'w') as f:
        f.write('1')
    ceiling_path = path.join(COUNTER_PATH, c, COUNT0, CEILING)
    with open(ceiling_path, 'w') as f:
        f.write(str(0xffffffff))

    cnt_path = path.join(COUNTER_PATH, c, COUNT0, COUNT)
    cnts.append(open(cnt_path, 'r'))

while True:
    for c in cnts:
        c.seek(0)
        val = int(c.read())
        if val >= 0x80000000:
            val -= 0x100000000
        print(val, end=' ')
    print()
    sleep(1)

David Lechner (4):
  dt-bindings: counter: new bindings for TI eQEP
  counter: new TI eQEP driver
  ARM: dts: am33xx: Add nodes for eQEP
  ARM: dts: am335x-boneblue: Enable eQEP

 .../devicetree/bindings/counter/ti-eqep.txt   |  18 +
 MAINTAINERS                                   |   6 +
 arch/arm/boot/dts/am335x-boneblue.dts         |  54 +++
 arch/arm/boot/dts/am33xx-l4.dtsi              |  27 ++
 drivers/counter/Kconfig                       |  12 +
 drivers/counter/Makefile                      |   1 +
 drivers/counter/ti-eqep.c                     | 381 ++++++++++++++++++
 drivers/pwm/Kconfig                           |   2 +-
 8 files changed, 500 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/counter/ti-eqep.txt
 create mode 100644 drivers/counter/ti-eqep.c

-- 
2.17.1

             reply	other threads:[~2019-07-22 15:45 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22 15:45 David Lechner [this message]
2019-07-22 15:45 ` [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP David Lechner
2019-07-27 19:48   ` Jonathan Cameron
2019-08-02  7:25     ` William Breathitt Gray
2019-08-02 13:34       ` Rob Herring
2019-08-02 13:58         ` William Breathitt Gray
2019-07-22 15:45 ` [PATCH 2/4] counter: new TI eQEP driver David Lechner
2019-07-30 12:35   ` Uwe Kleine-König
2019-07-30 15:28     ` David Lechner
2019-08-02  9:27   ` William Breathitt Gray
2019-08-02 16:09     ` David Lechner
2019-08-02 16:17     ` David Lechner
2019-08-02 16:40       ` William Breathitt Gray
2019-07-22 15:45 ` [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP David Lechner
2019-07-23  8:42   ` Tony Lindgren
2019-07-23 14:45     ` David Lechner
2019-07-23 14:51       ` Tony Lindgren
2019-07-22 15:45 ` [PATCH 4/4] ARM: dts: am335x-boneblue: Enable eQEP David Lechner
2019-07-25 12:40 ` [PATCH 0/4] new driver for TI eQEP William Breathitt Gray
2019-07-25 22:52   ` David Lechner
2019-07-27 19:45     ` Jonathan Cameron
2019-07-30  4:45     ` William Breathitt Gray
2019-08-01 17:37       ` David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190722154538.5314-1-david@lechnology.com \
    --to=david@lechnology.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=tony@atomide.com \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).