From mboxrd@z Thu Jan  1 00:00:00 1970
From: Shawn Guo <shawnguo@kernel.org>
Subject: Re: [PATCH v6 0/2] Add basic support for pico-pi-imx8m
Date: Tue, 23 Jul 2019 16:25:10 +0800
Message-ID: <20190723082509.GS15632@dragon>
References: <20190722102730.15763-1-andradanciu1997@gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20190722102730.15763-1-andradanciu1997@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
To: andradanciu1997 <andradanciu1997@gmail.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, manivannan.sadhasivam@linaro.org, andrew.smirnov@gmail.com, Michal.Vokac@ysoft.com, ping.bai@nxp.com, u.kleine-koenig@pengutronix.de, leoyang.li@nxp.com, aisheng.dong@nxp.com, l.stach@pengutronix.de, pankaj.bansal@nxp.com, angus@akkea.ca, pramod.kumar_1@nxp.com, bhaskar.upadhaya@nxp.com, vabhav.sharma@nxp.com, richard.hu@technexion.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
List-Id: devicetree@vger.kernel.org

On Mon, Jul 22, 2019 at 01:27:28PM +0300, andradanciu1997 wrote:
> Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu
> Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf
> 
> Changes since v5:
>  - removed comment /* PMIC BD71837 PMIC_nINT GPIO1_IO12 */
>  - added "Reviewed-by" tags
> 
> Changes since v4:
>  - removed #address-cells and  #size-cells from regulators node
> 
> Changes since v3:
>  - renamed pico-pi-8m.dts to imx8mq-pico-pi.dts
>  - moved iomuxc node as the last one
>  - removed pinctrl-assert-gpios property from fec1 node
>  - removed at803x,led-act-blind-workaround, at803x,eee-disabled
>    properties from mdio node
>  - added pinctrl-names = "default" to i2c1 node
>  - changed bd71837 pmic support properties according to
>    Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
>  - removed A53_0 node
> 
> Changes since v2:
>  - changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to
>    technexion,pico-pi-imx8m
>  - removed bootargs property
>  - removed regulators node and put fixed regulator directly under root node
>  - changed node name from usb_otg_vbus to regulator-usb-otg-vbus
>  - removed pinctrl-names property from iomuxc node
>  - removed wand-pi-8m container node
>  - sorted pinctrl nodes alphabetically
>  - removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream
>    driver
>  - changed properties' order in usb_dwc3_1 node
> 
> Changes since v1:
>  - renamed wandboard-pi-8m.dts to pico-pi-8m.dts
>  - removed pinctrl_csi1, pinctrl_wifi_ctrl
>  - used generic name for pmic
>  - removed gpo node
>  - delete regulator-virtuals node
>  - remove always-on property from buck1-8 and ldo3-7
>  - remove pmic-buck-uses-i2c-dvs property for buck1-4
> 
> Andra Danciu (1):
>   dt-bindings: arm: fsl: Add the pico-pi-imx8m board
> 
> Richard Hu (1):
>   arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M

Applied both, thanks.