From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tony Lindgren <tony@atomide.com>
Subject: Re: [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
Date: Tue, 23 Jul 2019 01:42:13 -0700
Message-ID: <20190723084213.GR5447@atomide.com>
References: <20190722154538.5314-1-david@lechnology.com>
 <20190722154538.5314-4-david@lechnology.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20190722154538.5314-4-david@lechnology.com>
Sender: linux-kernel-owner@vger.kernel.org
To: David Lechner <david@lechnology.com>
Cc: linux-iio@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, =?utf-8?Q?Beno=C3=AEt?= Cousson <bcousson@baylibre.com>, William Breathitt Gray <vilhelm.gray@gmail.com>, Thierry Reding <thierry.reding@gmail.com>, linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org
List-Id: devicetree@vger.kernel.org

* David Lechner <david@lechnology.com> [190722 15:46]:
> This adds new nodes for the Texas Instruments Enhanced Quadrature
> Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX.
> 
> Signed-off-by: David Lechner <david@lechnology.com>
> ---
>  arch/arm/boot/dts/am33xx-l4.dtsi | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
> index 3b1fb2ba4dff..7fdc2f61c553 100644
> --- a/arch/arm/boot/dts/am33xx-l4.dtsi
> +++ b/arch/arm/boot/dts/am33xx-l4.dtsi
> @@ -1908,6 +1908,15 @@
>  					status = "disabled";
>  				};
>  
> +				eqep0: eqep@180 {
> +					compatible = "ti,am3352-eqep";
> +					reg = <0x180 0x80>;
> +					clocks = <&l4ls_gclk>;
> +					clock-names = "fck";
> +					interrupts = <79>;
> +					status = "disabled";
> +				};
> +

You probably no longer need to map any clocks here as this
is now a child of the interconnect target module managed
by ti-sysc driver. I have not checked but probably l4ls_gclk
is same as clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>
already managed by ti-sysc. If so, then just using runtime PM
calls in any of the child device drivers will keep it enabled.

If l4ls_gclk is a separate functional clock, then it still
needs to be managed by the child device driver directly.

Regards,

Tony