[PATCH AUTOSEL 5.2 02/85] ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200

[PATCH AUTOSEL 5.2 02/85] ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 1c0479023412ab7834f2e98b796eb0d8c627cd62 ]

As some point hs200 was failing on rk3288-veyron-minnie.  See commit
984926781122 ("ARM: dts: rockchip: temporarily remove emmc hs200 speed
from rk3288 minnie").  Although I didn't track down exactly when it
started working, it seems to work OK now, so let's turn it back on.

To test this, I booted from SD card and then used this script to
stress the enumeration process after fixing a memory leak [1]:
  cd /sys/bus/platform/drivers/dwmmc_rockchip
  for i in $(seq 1 3000); do
    echo "========================" $i
    echo ff0f0000.dwmmc > unbind
    sleep .5
    echo ff0f0000.dwmmc > bind
    while true; do
      if [ -e /dev/mmcblk2 ]; then
        break;
      fi
      sleep .1
    done
  done

It worked fine.

[1] https://lkml.kernel.org/r/20190503233526.226272-1-dianders@chromium.org

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 468a1818545d..ce57881625ec 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -90,10 +90,6 @@
 	pwm-off-delay-ms = <200>;
 };
 
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
-};
-
 &gpio_keys {
 	pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 05/85] ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 8ef1ba39a9fa53d2205e633bc9b21840a275908e ]

This is similar to commit e6186820a745 ("arm64: dts: rockchip: Arch
counter doesn't tick in system suspend").  Specifically on the rk3288
it can be seen that the timer stops ticking in suspend if we end up
running through the "osc_disable" path in rk3288_slp_mode_set().  In
that path the 24 MHz clock will turn off and the timer stops.

To test this, I ran this on a Chrome OS filesystem:
  before=$(date); \
  suspend_stress_test -c1 --suspend_min=30 --suspend_max=31; \
  echo ${before}; date

...and I found that unless I plug in a device that requests USB wakeup
to be active that the two calls to "date" would show that fewer than
30 seconds passed.

NOTE: deep suspend (where the 24 MHz clock gets disabled) isn't
supported yet on upstream Linux so this was tested on a downstream
kernel.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index aa017abf4f42..f7bc886a4b51 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -231,6 +231,7 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
 	};
 
 	timer: timer@ff810000 {
-- 
2.20.1

[PATCH AUTOSEL 5.2 07/85] arm64: dts: qcom: qcs404-evb: fix l3 min voltage

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@linaro.org>

[ Upstream commit 887b528c958f40b064d53edd0bfa9fea3a69eccd ]

The current l3 min voltage level is not supported by
the regulator (the voltage is not a multiple of the regulator step size),
so a driver requesting this exact voltage would fail, see discussion in:
https://patchwork.kernel.org/comment/22461199/

It was agreed upon to set a min voltage level that is a multiple of the
regulator step size.

There was actually a patch sent that did this:
https://patchwork.kernel.org/patch/10819313/

However, the commit 331ab98f8c4a ("arm64: dts: qcom: qcs404:
Fix voltages l3") that was applied is not identical to that patch.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 2c3127167e3c..d987d6741e40 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -118,7 +118,7 @@
 		};
 
 		vreg_l3_1p05: l3 {
-			regulator-min-microvolt = <1050000>;
+			regulator-min-microvolt = <1048000>;
 			regulator-max-microvolt = <1160000>;
 		};
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 09/85] arm64: dts: marvell: mcbin: enlarge PCI memory window

[Sasha Levin]

From: Heinrich Schuchardt <xypron.glpk@gmx.de>

[ Upstream commit d3446b266a8c72a7bbc94b65f5fc6d206be77d24 ]

Running a graphics adapter on the MACCHIATObin fails due to an
insufficiently sized memory window.

Enlarge the memory window for the PCIe slot to 512 MiB.

With the patch I am able to use a GT710 graphics adapter with 1 GB onboard
memory.

These are the mapped memory areas that the graphics adapter is actually
using:

Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at c8000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
Expansion ROM at ca000000 [disabled] [size=512K]

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 329f8ceeebea..205071b45a32 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -184,6 +184,8 @@
 	num-lanes = <4>;
 	num-viewport = <8>;
 	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+	ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
+		  0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
 	status = "okay";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 17/85] arm64: qcom: qcs404: Add reset-cells to GCC node

[Sasha Levin]

From: Andy Gross <agross@kernel.org>

[ Upstream commit 0763d0c2273a3c72247d325c48fbac3d918d6b87 ]

This patch adds a reset-cells property to the gcc controller on the QCS404.
Without this in place, we get warnings like the following if nodes reference
a gcc reset:

arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property):
/soc@0/remoteproc@b00000: Missing property '#reset-cells' in node
/soc@0/clock-controller@1800000 or bad phandle (referred from resets[0])
  also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3
  DTC     arch/arm64/boot/dts/qcom/qcs404-evb-4000.dtb
arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property):
/soc@0/remoteproc@b00000: Missing property '#reset-cells' in node
/soc@0/clock-controller@1800000 or bad phandle (referred from resets[0])
  also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3

Signed-off-by: Andy Gross <agross@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index ffedf9640af7..65a2cbeb28be 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -383,6 +383,7 @@
 			compatible = "qcom,gcc-qcs404";
 			reg = <0x01800000 0x80000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 
 			assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
 			assigned-clock-rates = <19200000>;
-- 
2.20.1

[PATCH AUTOSEL 5.2 03/85] ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again

[Sasha Levin]

From: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

[ Upstream commit 99fa066710f75f18f4d9a5bc5f6a711968a581d5 ]

When I try to boot rk3288-veyron-mickey I totally fail to make the
eMMC work.  Specifically my logs (on Chrome OS 4.19):

  mmc_host mmc1: card is non-removable.
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: new high speed MMC card at address 0001
  mmcblk1: mmc1:0001 HAG2e 14.7 GiB
  mmcblk1boot0: mmc1:0001 HAG2e partition 1 4.00 MiB
  mmcblk1boot1: mmc1:0001 HAG2e partition 2 4.00 MiB
  mmcblk1rpmb: mmc1:0001 HAG2e partition 3 4.00 MiB, chardev (243:0)
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: tried to HW reset card, got error -110
  mmcblk1: error -110 requesting status
  mmcblk1: recovery failed!
  print_req_error: I/O error, dev mmcblk1, sector 0
  ...

When I remove the '/delete-property/mmc-hs200-1_8v' then everything is
hunky dory.

That line comes from the original submission of the mickey dts
upstream, so presumably at the time the HS200 was failing and just
enumerating things as a high speed device was fine.  ...or maybe it's
just that some mickey devices work when enumerating at "high speed",
just not mine?

In any case, hs200 seems good now.  Let's turn it on.

Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/rk3288-veyron-mickey.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index e852594417b5..b13f87792e9f 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -128,10 +128,6 @@
 	};
 };
 
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
-};
-
 &i2c2 {
 	status = "disabled";
 };
-- 
2.20.1

[PATCH AUTOSEL 5.2 12/85] arm64: dts: rockchip: fix isp iommu clocks and power domain

[Sasha Levin]

From: Helen Koike <helen.koike-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

[ Upstream commit c432a29d3fc9ee928caeca2f5cf68b3aebfa6817 ]

isp iommu requires wrapper variants of the clocks.
noc variants are always on and using the wrapper variants will activate
{A,H}CLK_ISP{0,1} due to the hierarchy.

Tested using the pending isp patch set (which is not upstream
yet). Without this patch, streaming from the isp stalls.

Also add the respective power domain and remove the "disabled" status.

Refer:
 RK3399 TRM v1.4 Fig. 2-4 RK3399 Clock Architecture Diagram
 RK3399 TRM v1.4 Fig. 8-1 RK3399 Power Domain Partition

Signed-off-by: Helen Koike <helen.koike-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 196ac9b78076..89594a7276f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1706,11 +1706,11 @@
 		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
 		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "isp0_mmu";
-		clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>;
+		clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP0>;
 		rockchip,disable-mmu-reset;
-		status = "disabled";
 	};
 
 	isp1_mmu: iommu@ff924000 {
@@ -1718,11 +1718,11 @@
 		reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "isp1_mmu";
-		clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>;
+		clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP1>;
 		rockchip,disable-mmu-reset;
-		status = "disabled";
 	};
 
 	hdmi_sound: hdmi-sound {
-- 
2.20.1

[PATCH AUTOSEL 5.2 25/85] arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire

[Sasha Levin]

From: Vicente Bergas <vicencb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

[ Upstream commit e1d9149e8389f1690cdd4e4056766dd26488a0fe ]

Before this patch, the Type-C port on the Sapphire board is dead.
If setting the 'regulator-always-on' property to 'vcc5v0_typec0'
then the port works for about 4 seconds at start-up. This is a
sample trace with a memory stick plugged in:
1.- The memory stick LED lights on and kernel reports:
[    4.782999] scsi 0:0:0:0: Direct-Access USB DISK PMAP PQ: 0 ANSI: 4
[    5.904580] sd 0:0:0:0: [sdb] 3913344 512-byte logical blocks: (2.00 GB/1.87 GiB)
[    5.906860] sd 0:0:0:0: [sdb] Write Protect is off
[    5.908973] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    5.909122] sd 0:0:0:0: [sdb] No Caching mode page found
[    5.911214] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    5.951585]  sdb: sdb1
[    5.954816] sd 0:0:0:0: [sdb] Attached SCSI removable disk
2.- 4 seconds later the memory stick LED lights off and kernel reports:
[    9.082822] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
3.- After a minute the kernel reports:
[   71.666761] usb 5-1: USB disconnect, device number 2
It has been checked that, although the LED is off, VBUS is present.

If, instead, the dr_mode is changed to host and the phy-supply changed
accordingly, then it works. It has only been tested in host mode.

Signed-off-by: Vicente Bergas <vicencb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 04623e52ac5d..1bc1579674e5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -565,12 +565,11 @@
 	status = "okay";
 
 	u2phy0_otg: otg-port {
-		phy-supply = <&vcc5v0_typec0>;
 		status = "okay";
 	};
 
 	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
+		phy-supply = <&vcc5v0_typec0>;
 		status = "okay";
 	};
 };
@@ -620,7 +619,7 @@
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {
-- 
2.20.1