[PATCH AUTOSEL 4.14 02/37] ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200

[PATCH AUTOSEL 4.14 02/37] ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200

[Sasha Levin]

From: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

[ Upstream commit 1c0479023412ab7834f2e98b796eb0d8c627cd62 ]

As some point hs200 was failing on rk3288-veyron-minnie.  See commit
984926781122 ("ARM: dts: rockchip: temporarily remove emmc hs200 speed
from rk3288 minnie").  Although I didn't track down exactly when it
started working, it seems to work OK now, so let's turn it back on.

To test this, I booted from SD card and then used this script to
stress the enumeration process after fixing a memory leak [1]:
  cd /sys/bus/platform/drivers/dwmmc_rockchip
  for i in $(seq 1 3000); do
    echo "========================" $i
    echo ff0f0000.dwmmc > unbind
    sleep .5
    echo ff0f0000.dwmmc > bind
    while true; do
      if [ -e /dev/mmcblk2 ]; then
        break;
      fi
      sleep .1
    done
  done

It worked fine.

[1] https://lkml.kernel.org/r/20190503233526.226272-1-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org

Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 544de6027aaa..6000dca1cf05 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -125,10 +125,6 @@
 	power-supply = <&backlight_regulator>;
 };
 
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
-};
-
 &gpio_keys {
 	pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 03/37] ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again

[Sasha Levin]

From: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

[ Upstream commit 99fa066710f75f18f4d9a5bc5f6a711968a581d5 ]

When I try to boot rk3288-veyron-mickey I totally fail to make the
eMMC work.  Specifically my logs (on Chrome OS 4.19):

  mmc_host mmc1: card is non-removable.
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: new high speed MMC card at address 0001
  mmcblk1: mmc1:0001 HAG2e 14.7 GiB
  mmcblk1boot0: mmc1:0001 HAG2e partition 1 4.00 MiB
  mmcblk1boot1: mmc1:0001 HAG2e partition 2 4.00 MiB
  mmcblk1rpmb: mmc1:0001 HAG2e partition 3 4.00 MiB, chardev (243:0)
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: tried to HW reset card, got error -110
  mmcblk1: error -110 requesting status
  mmcblk1: recovery failed!
  print_req_error: I/O error, dev mmcblk1, sector 0
  ...

When I remove the '/delete-property/mmc-hs200-1_8v' then everything is
hunky dory.

That line comes from the original submission of the mickey dts
upstream, so presumably at the time the HS200 was failing and just
enumerating things as a high speed device was fine.  ...or maybe it's
just that some mickey devices work when enumerating at "high speed",
just not mine?

In any case, hs200 seems good now.  Let's turn it on.

Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/rk3288-veyron-mickey.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index f0994f0e5774..d6ca67866bc0 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -161,10 +161,6 @@
 	};
 };
 
-&emmc {
-	/delete-property/mmc-hs200-1_8v;
-};
-
 &i2c2 {
 	status = "disabled";
 };
-- 
2.20.1

[PATCH AUTOSEL 4.14 04/37] ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend

[Sasha Levin]

From: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

[ Upstream commit 8ef1ba39a9fa53d2205e633bc9b21840a275908e ]

This is similar to commit e6186820a745 ("arm64: dts: rockchip: Arch
counter doesn't tick in system suspend").  Specifically on the rk3288
it can be seen that the timer stops ticking in suspend if we end up
running through the "osc_disable" path in rk3288_slp_mode_set().  In
that path the 24 MHz clock will turn off and the timer stops.

To test this, I ran this on a Chrome OS filesystem:
  before=$(date); \
  suspend_stress_test -c1 --suspend_min=30 --suspend_max=31; \
  echo ${before}; date

...and I found that unless I plug in a device that requests USB wakeup
to be active that the two calls to "date" would show that fewer than
30 seconds passed.

NOTE: deep suspend (where the 24 MHz clock gets disabled) isn't
supported yet on upstream Linux so this was tested on a downstream
kernel.

Signed-off-by: Douglas Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 5a7888581eea..23907d9ce89a 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -213,6 +213,7 @@
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
 	};
 
 	timer: timer@ff810000 {
-- 
2.20.1