From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?utf-8?Q?Ond=C5=99ej?= Jirman Subject: Re: [linux-sunxi] [PATCH 2/3] rtc: sun6i: Add support for H6 RTC Date: Mon, 5 Aug 2019 12:20:01 +0200 Message-ID: <20190805102001.guo7e52bl5agp2w4@core.my.home> References: <20190412120730.473-1-megous@megous.com> <20190412120730.473-3-megous@megous.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Chen-Yu Tsai Cc: Alessandro Zummo , Alexandre Belloni , Rob Herring , Mark Rutland , Maxime Ripard , linux-rtc@vger.kernel.org, devicetree , linux-arm-kernel , linux-kernel , linux-sunxi List-Id: devicetree@vger.kernel.org On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote: > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi > wrote: > > > > From: Ondrej Jirman > > > > RTC on H6 is mostly the same as on H5 and H3. It has slight differences > > mostly in features that are not yet supported by this driver. > > > > Some differences are already stated in the comments in existing code. > > One other difference is that H6 has extra bit in LOSC_CTRL_REG, called > > EXT_LOSC_EN to enable/disable external low speed crystal oscillator. > > > > It also has bit EXT_LOSC_STA in LOSC_AUTO_SWT_STA_REG, to check whether > > external low speed oscillator is working correctly. > > > > This patch adds support for enabling LOSC when necessary: > > > > - during reparenting > > - when probing the clock > > > > H6 also has capacbility to automatically reparent RTC clock from > > external crystal oscillator, to internal RC oscillator, if external > > oscillator fails. This is enabled by default. Disable it during > > probe. > > > > Signed-off-by: Ondrej Jirman > > --- > > drivers/rtc/rtc-sun6i.c | 40 ++++++++++++++++++++++++++++++++++++++-- > > 1 file changed, 38 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c > > index 11f56de52179..7375a530c565 100644 > > --- a/drivers/rtc/rtc-sun6i.c > > +++ b/drivers/rtc/rtc-sun6i.c > > @@ -41,9 +41,11 @@ > > /* Control register */ > > #define SUN6I_LOSC_CTRL 0x0000 > > #define SUN6I_LOSC_CTRL_KEY (0x16aa << 16) > > +#define SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS BIT(15) > > Manual says bit 14? Or is this different from LOSC_AUTO_SWT_EN? > > The rest looks ok. Yes, see H6 BSP: drivers/rtc/rtc-sunxi.h 20 #define REG_CLK32K_AUTO_SWT_EN BIT(14) 21 #define REG_CLK32K_AUTO_SWT_BYPASS BIT(15) regards, Ondrej > ChenYu