From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guillaume La Roque Subject: [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Date: Tue, 6 Aug 2019 15:05:00 +0200 Message-ID: <20190806130506.8753-1-glaroque@baylibre.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: daniel.lezcano@linaro.org, khilman@baylibre.com Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org This patchs series add support of New Amlogic temperature sensor and minimal thermal zone for SEI510 and ODROID-N2 boards. First implementation was doing on IIO[1] but after comments i move on thermal framework. Formulas and calibration values come from amlogic. Changes since v2: - fix yaml documention - remove unneeded status variable for temperature-sensor node - rework driver after Martin review - add some information in commit message Changes since v1: - fix enum vs const in documentation - fix error with thermal-sensor-cells value set to 1 instead of 0 - add some dependencies needed to add cooling-maps Dependencies : - patch 3,4 & 5: depends on Neil's patch and series : - missing dwc2 phy-names[2] - patchsets to add DVFS on G12a[3] which have deps on [4] and [5] [1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/ [2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/ [3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/ [4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/ [5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/ Guillaume La Roque (6): dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal thermal: amlogic: Add thermal driver to support G12 SoCs arm64: dts: amlogic: g12: add temperature sensor arm64: dts: meson: sei510: Add minimal thermal zone arm64: dts: amlogic: odroid-n2: add minimal thermal zone MAINTAINERS: add entry for Amlogic Thermal driver .../bindings/thermal/amlogic,thermal.yaml | 54 +++ MAINTAINERS | 9 + .../boot/dts/amlogic/meson-g12-common.dtsi | 20 ++ .../boot/dts/amlogic/meson-g12a-sei510.dts | 56 +++ .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 60 ++++ drivers/thermal/Kconfig | 11 + drivers/thermal/Makefile | 1 + drivers/thermal/amlogic_thermal.c | 336 ++++++++++++++++++ 8 files changed, 547 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml create mode 100644 drivers/thermal/amlogic_thermal.c -- 2.17.1