From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: lee.jones@linaro.org
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
patches@opensource.cirrus.com
Subject: [PATCH 2/2] mfd: madera: Add support for requesting the supply clocks
Date: Tue, 6 Aug 2019 16:13:21 +0100 [thread overview]
Message-ID: <20190806151321.31137-2-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20190806151321.31137-1-ckeepax@opensource.cirrus.com>
Add the ability to get the clock for each clock input pin of the chip
and enable MCLK2 since that is expected to be a permanently enabled
32kHz clock.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
drivers/mfd/madera-core.c | 24 +++++++++++++++++++++++-
include/linux/mfd/madera/core.h | 11 +++++++++++
2 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
index 29540cbf75934..8d7ab1c7bf9f7 100644
--- a/drivers/mfd/madera-core.c
+++ b/drivers/mfd/madera-core.c
@@ -428,6 +428,7 @@ static void madera_set_micbias_info(struct madera *madera)
int madera_dev_init(struct madera *madera)
{
+ static const char * const mclk_name[] = { "mclk1", "mclk2", "mclk3" };
struct device *dev = madera->dev;
unsigned int hwid;
int (*patch_fn)(struct madera *) = NULL;
@@ -450,6 +451,17 @@ int madera_dev_init(struct madera *madera)
sizeof(madera->pdata));
}
+ BUILD_BUG_ON(ARRAY_SIZE(madera->mclk) != ARRAY_SIZE(mclk_name));
+ for (i = 0; i < ARRAY_SIZE(madera->mclk); i++) {
+ madera->mclk[i] = devm_clk_get_optional(madera->dev,
+ mclk_name[i]);
+ if (IS_ERR(madera->mclk[i])) {
+ dev_warn(madera->dev, "Failed to get %s: %ld\n",
+ mclk_name[i], PTR_ERR(madera->mclk[i]));
+ madera->mclk[i] = NULL;
+ }
+ }
+
ret = madera_get_reset_gpio(madera);
if (ret)
return ret;
@@ -660,13 +672,19 @@ int madera_dev_init(struct madera *madera)
}
/* Init 32k clock sourced from MCLK2 */
+ ret = clk_prepare_enable(madera->mclk[MADERA_MCLK2]);
+ if (ret != 0) {
+ dev_err(madera->dev, "Failed to enable 32k clock: %d\n", ret);
+ goto err_reset;
+ }
+
ret = regmap_update_bits(madera->regmap,
MADERA_CLOCK_32K_1,
MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
if (ret) {
dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
- goto err_reset;
+ goto err_clock;
}
pm_runtime_set_active(madera->dev);
@@ -687,6 +705,8 @@ int madera_dev_init(struct madera *madera)
err_pm_runtime:
pm_runtime_disable(madera->dev);
+err_clock:
+ clk_disable_unprepare(madera->mclk[MADERA_MCLK2]);
err_reset:
madera_enable_hard_reset(madera);
regulator_disable(madera->dcvdd);
@@ -713,6 +733,8 @@ int madera_dev_exit(struct madera *madera)
*/
pm_runtime_disable(madera->dev);
+ clk_disable_unprepare(madera->mclk[MADERA_MCLK2]);
+
regulator_disable(madera->dcvdd);
regulator_put(madera->dcvdd);
diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
index 7ffa696cce7ca..2b6c83fe221dc 100644
--- a/include/linux/mfd/madera/core.h
+++ b/include/linux/mfd/madera/core.h
@@ -8,6 +8,7 @@
#ifndef MADERA_CORE_H
#define MADERA_CORE_H
+#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/mfd/madera/pdata.h>
@@ -29,6 +30,13 @@ enum madera_type {
CS42L92 = 9,
};
+enum {
+ MADERA_MCLK1,
+ MADERA_MCLK2,
+ MADERA_MCLK3,
+ MADERA_NUM_MCLK
+};
+
#define MADERA_MAX_CORE_SUPPLIES 2
#define MADERA_MAX_GPIOS 40
@@ -155,6 +163,7 @@ struct snd_soc_dapm_context;
* @irq_dev: the irqchip child driver device
* @irq_data: pointer to irqchip data for the child irqchip driver
* @irq: host irq number from SPI or I2C configuration
+ * @mclk: pointers to clock supplies
* @out_clamp: indicates output clamp state for each analogue output
* @out_shorted: indicates short circuit state for each analogue output
* @hp_ena: bitflags of enable state for the headphone outputs
@@ -184,6 +193,8 @@ struct madera {
struct regmap_irq_chip_data *irq_data;
int irq;
+ struct clk *mclk[MADERA_NUM_MCLK];
+
unsigned int num_micbias;
unsigned int num_childbias[MADERA_MAX_MICBIAS];
--
2.11.0
next prev parent reply other threads:[~2019-08-06 15:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 15:13 [PATCH 1/2] mfd: madera: Update DT binding document to support clock supplies Charles Keepax
2019-08-06 15:13 ` Charles Keepax [this message]
2019-08-12 10:38 ` [PATCH 2/2] mfd: madera: Add support for requesting the supply clocks Lee Jones
2019-08-12 16:09 ` Charles Keepax
2019-08-12 16:28 ` Richard Fitzgerald
2019-08-13 7:18 ` Lee Jones
2019-08-13 7:59 ` Charles Keepax
2019-08-12 10:39 ` [PATCH 1/2] mfd: madera: Update DT binding document to support clock supplies Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190806151321.31137-2-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=patches@opensource.cirrus.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).