From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hui Song Subject: [PATCH v1 1/3] gpio: mpc8xxx: add ls1088a platform gpio node DT binding description Date: Thu, 8 Aug 2019 18:16:26 +0800 Message-ID: <20190808101628.36782-1-hui.song_1@nxp.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Shawn Guo , Li Yang , Rob Herring , Mark Rutland , Linus Walleij , Bartosz Golaszewski Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Song Hui List-Id: devicetree@vger.kernel.org From: Song Hui ls1088a and ls1028a platform share common gpio node. Signed-off-by: Song Hui --- Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index baf95d9..cd28e93 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -4,7 +4,7 @@ Required properties: - compatible : Should be "fsl,-gpio" The following s are known to be supported: mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq, - ls1021a, ls1043a, ls2080a, ls1028a. + ls1021a, ls1043a, ls2080a, ls1028a, ls1088a. - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all 32 pins. - #gpio-cells : Should be two. The first cell is the pin number and @@ -39,10 +39,10 @@ gpio0: gpio@2300000 { }; -Example of gpio-controller node for a ls1028a SoC: +Example of gpio-controller node for a ls1028a/ls1088a SoC: gpio1: gpio@2300000 { - compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; + compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = ; gpio-controller; -- 2.9.5