From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [v6,2/2] dt-bindings: rtc: add bindings for FlexTimer Module Date: Mon, 12 Aug 2019 17:16:07 -0600 Message-ID: <20190812231607.GA21242@bogus> References: <20190719035400.9800-1-biwen.li@nxp.com> <20190719035400.9800-2-biwen.li@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190719035400.9800-2-biwen.li@nxp.com> Sender: linux-kernel-owner@vger.kernel.org To: Biwen Li Cc: a.zummo@towertech.it, alexandre.belloni@bootlin.com, leoyang.li@nxp.com, linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org, xiaobo.xie@nxp.com, jiafei.pan@nxp.com, ran.wang_1@nxp.com, mark.rutland@arm.com, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On Fri, Jul 19, 2019 at 11:54:00AM +0800, Biwen Li wrote: > The patch adds bindings for FlexTimer Module > > Signed-off-by: Biwen Li > --- > Change in v6: > - correct subject > - delete note > - remove reg property about IP Powerdown exception register > > Change in v5: > - None > > Change in v4: > - add note about dts and kernel options > - add aliases in example > > Change in v3: > - remove reg-names property > - correct cells number > > Change in v2: > - replace ls1043a with ls1088a as example > - add rcpm node and fsl,rcpm-wakeup property > > .../bindings/rtc/rtc-fsl-ftm-alarm.txt | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt > > diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt > new file mode 100644 > index 000000000000..9291b022ffc7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt > @@ -0,0 +1,41 @@ > +Freescale FlexTimer Module (FTM) Alarm > + > +Required properties: > +- compatible : Should be "fsl,-ftm-alarm", the > + supported chips include > + "fsl,ls1012a-ftm-alarm" > + "fsl,ls1021a-ftm-alarm" > + "fsl,ls1028a-ftm-alarm" > + "fsl,ls1043a-ftm-alarm" > + "fsl,ls1046a-ftm-alarm" > + "fsl,ls1088a-ftm-alarm" > + "fsl,ls208xa-ftm-alarm" > +- reg : Specifies base physical address and size of the register sets for the > + FlexTimer Module. > +- interrupts : Should be the FlexTimer Module interrupt. > +- fsl,rcpm-wakeup property and rcpm node : Please refer > + Documentation/devicetree/bindings/soc/fsl/rcpm.txt > + > +Optional properties: > +- big-endian: If the host controller is big-endian mode, specify this property. > + The default endian mode is little-endian. > + > +Example: > +aliases { > + ... > + rtc1 = ftm_alarm0; // Use FlexTimer Module as /dev/rtc1 > + ... > +}; As I said before, drop this. It's not going to work when this is converted to schema and the example is compiled. Feel free to convert this to schema and see... > + > +rcpm: rcpm@1e34040 { > + compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; > + reg = <0x0 0x1e34040 0x0 0x18>; > + #fsl,rcpm-wakeup-cells = <6>; > +}; > + > +ftm_alarm0: timer@2800000 { If this is an RTC, then rtc@... > + compatible = "fsl,ls1088a-ftm-alarm"; > + reg = <0x0 0x2800000 0x0 0x10000>; > + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; > + interrupts = <0 44 4>; > +}; > -- > 2.17.1 >