From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinod Koul Subject: [PATCH 10/22] arm64: dts: qcom: pm8150b: Add pon and adc nodes Date: Wed, 14 Aug 2019 18:20:00 +0530 Message-ID: <20190814125012.8700-11-vkoul@kernel.org> References: <20190814125012.8700-1-vkoul@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190814125012.8700-1-vkoul@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross Cc: linux-arm-msm@vger.kernel.org, Bjorn Andersson , sibis@codeaurora.org, Vinod Koul , Rob Herring , Mark Rutland , Stephen Boyd , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Add the pon and adc nodes found in pm8150b PMIC. Signed-off-by: Vinod Koul --- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index c0a678b0f159..846197bd65cd 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -2,6 +2,7 @@ // Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. // Copyright (c) 2019, Linaro Limited +#include #include #include @@ -11,6 +12,59 @@ reg = <0x2 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = ; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + + smb1390-therm@14 { + reg = ; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1390_therm"; + }; + + smb1355-therm@78 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "smb1355_therm"; + }; + }; }; qcom,pm8150@3 { -- 2.20.1