From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinod Koul Subject: [PATCH 11/22] arm64: dts: qcom: pm8150b: Add gpio node Date: Wed, 14 Aug 2019 18:20:01 +0530 Message-ID: <20190814125012.8700-12-vkoul@kernel.org> References: <20190814125012.8700-1-vkoul@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190814125012.8700-1-vkoul@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross Cc: linux-arm-msm@vger.kernel.org, Bjorn Andersson , sibis@codeaurora.org, Vinod Koul , Rob Herring , Mark Rutland , Stephen Boyd , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Add the gpio node found in pm8150b PMIC. Signed-off-by: Vinod Koul --- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 846197bd65cd..2bb2384461f7 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -65,6 +65,25 @@ label = "smb1355_therm"; }; }; + + pm8150b_gpios: gpio@c000 { + compatible = "qcom,pm8150b-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>, + <0x2 0xc1 0 IRQ_TYPE_NONE>, + <0x2 0xc2 0 IRQ_TYPE_NONE>, + <0x2 0xc3 0 IRQ_TYPE_NONE>, + <0x2 0xc4 0 IRQ_TYPE_NONE>, + <0x2 0xc5 0 IRQ_TYPE_NONE>, + <0x2 0xc6 0 IRQ_TYPE_NONE>, + <0x2 0xc7 0 IRQ_TYPE_NONE>, + <0x2 0xc8 0 IRQ_TYPE_NONE>, + <0x2 0xc9 0 IRQ_TYPE_NONE>, + <0x2 0xca 0 IRQ_TYPE_NONE>, + <0x2 0xcb 0 IRQ_TYPE_NONE>; + }; }; qcom,pm8150@3 { -- 2.20.1