From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinod Koul Subject: [PATCH 14/22] arm64: dts: qcom: pm8150l: Add gpio node Date: Wed, 14 Aug 2019 18:20:04 +0530 Message-ID: <20190814125012.8700-15-vkoul@kernel.org> References: <20190814125012.8700-1-vkoul@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190814125012.8700-1-vkoul@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross Cc: linux-arm-msm@vger.kernel.org, Bjorn Andersson , sibis@codeaurora.org, Vinod Koul , Rob Herring , Mark Rutland , Stephen Boyd , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Add the gpio node found in pm8150l PMIC. Signed-off-by: Vinod Koul --- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index d685dac426a3..dce72bff0e7a 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -44,6 +44,25 @@ label = "die_temp"; }; }; + + pm8150l_gpios: gpio@c000 { + compatible = "qcom,pm8150l-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x4 0xc0 0 IRQ_TYPE_NONE>, + <0x4 0xc1 0 IRQ_TYPE_NONE>, + <0x4 0xc2 0 IRQ_TYPE_NONE>, + <0x4 0xc3 0 IRQ_TYPE_NONE>, + <0x4 0xc4 0 IRQ_TYPE_NONE>, + <0x4 0xc5 0 IRQ_TYPE_NONE>, + <0x4 0xc6 0 IRQ_TYPE_NONE>, + <0x4 0xc7 0 IRQ_TYPE_NONE>, + <0x4 0xc8 0 IRQ_TYPE_NONE>, + <0x4 0xc9 0 IRQ_TYPE_NONE>, + <0x4 0xca 0 IRQ_TYPE_NONE>, + <0x4 0xcb 0 IRQ_TYPE_NONE>; + }; }; qcom,pm8150@5 { -- 2.20.1