From mboxrd@z Thu Jan 1 00:00:00 1970 From: Manivannan Sadhasivam Subject: [PATCH] dt-bindings: spi: Fix the number of CS lines documented as an example Date: Tue, 20 Aug 2019 17:20:00 +0530 Message-ID: <20190820115000.32041-1-manivannan.sadhasivam@linaro.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: broonie@kernel.org, robh+dt@kernel.org Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Manivannan Sadhasivam List-Id: devicetree@vger.kernel.org The number of CS lines is mentioned as 2 in the spi-controller binding but however in the example, 4 cs-gpios are used. Hence fix that to mention 4. Signed-off-by: Manivannan Sadhasivam --- Documentation/devicetree/bindings/spi/spi-controller.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index a02e2fe2bfb2..732339275848 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -31,7 +31,7 @@ properties: If that property is used, the number of chip selects will be increased automatically with max(cs-gpios, hardware chip selects). - So if, for example, the controller has 2 CS lines, and the + So if, for example, the controller has 4 CS lines, and the cs-gpios looks like this cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>; -- 2.17.1