From: Niklas Cassel <niklas.cassel@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Boyd <sboyd@kernel.org>,
Sibi Sankar <sibis@codeaurora.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 7/8] arm64: dts: qcom: sm8150: Add reserved-memory regions
Date: Tue, 20 Aug 2019 14:24:37 +0200 [thread overview]
Message-ID: <20190820122437.GA28228@centauri> (raw)
In-Reply-To: <20190820064216.8629-8-vkoul@kernel.org>
On Tue, Aug 20, 2019 at 12:12:15PM +0530, Vinod Koul wrote:
> Add the reserved memory regions in SM8150
Is there a reason not to squash this this patch 1/8 ?
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 111 +++++++++++++++++++++++++++
> 1 file changed, 111 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index d9dc95f851b7..8bf4b4c17ae0 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -153,6 +153,117 @@
> method = "smc";
> };
>
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + hyp_mem: memory@85700000 {
> + reg = <0x0 0x85700000 0x0 0x600000>;
> + no-map;
> + };
> +
> + xbl_mem: memory@85d00000 {
> + reg = <0x0 0x85d00000 0x0 0x140000>;
> + no-map;
> + };
> +
> + aop_mem: memory@85f00000 {
> + reg = <0x0 0x85f00000 0x0 0x20000>;
> + no-map;
> + };
> +
> + aop_cmd_db: memory@85f20000 {
> + compatible = "qcom,cmd-db";
> + reg = <0x0 0x85f20000 0x0 0x20000>;
> + no-map;
> + };
> +
> + smem_mem: memory@86000000 {
> + reg = <0x0 0x86000000 0x0 0x200000>;
> + no-map;
> + };
> +
> + tz_mem: memory@86200000 {
> + reg = <0x0 0x86200000 0x0 0x3900000>;
> + no-map;
> + };
> +
> + rmtfs_mem: memory@89b00000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0x89b00000 0x0 0x200000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + qcom,vmid = <15>;
> + };
> +
> + camera_mem: memory@8b700000 {
> + reg = <0x0 0x8b700000 0x0 0x500000>;
> + no-map;
> + };
> +
> + wlan_mem: memory@8bc00000 {
> + reg = <0x0 0x8bc00000 0x0 0x180000>;
> + no-map;
> + };
> +
> + npu_mem: memory@8bd80000 {
> + reg = <0x0 0x8bd80000 0x0 0x80000>;
> + no-map;
> + };
> +
> + adsp_mem: memory@8be00000 {
> + reg = <0x0 0x8be00000 0x0 0x1a00000>;
> + no-map;
> + };
> +
> + mpss_mem: memory@8d800000 {
> + reg = <0x0 0x8d800000 0x0 0x9600000>;
> + no-map;
> + };
> +
> + venus_mem: memory@96e00000 {
> + reg = <0x0 0x96e00000 0x0 0x500000>;
> + no-map;
> + };
> +
> + slpi_mem: memory@97300000 {
> + reg = <0x0 0x97300000 0x0 0x1400000>;
> + no-map;
> + };
> +
> + ipa_fw_mem: memory@98700000 {
> + reg = <0x0 0x98700000 0x0 0x10000>;
> + no-map;
> + };
> +
> + ipa_gsi_mem: memory@98710000 {
> + reg = <0x0 0x98710000 0x0 0x5000>;
> + no-map;
> + };
> +
> + gpu_mem: memory@98715000 {
> + reg = <0x0 0x98715000 0x0 0x2000>;
> + no-map;
> + };
> +
> + spss_mem: memory@98800000 {
> + reg = <0x0 0x98800000 0x0 0x100000>;
> + no-map;
> + };
> +
> + cdsp_mem: memory@98900000 {
> + reg = <0x0 0x98900000 0x0 0x1400000>;
> + no-map;
> + };
> +
> + qseecom_mem: memory@9e400000 {
> + reg = <0 0x9e400000 0 0x1400000>;
> + no-map;
> + };
> + };
> +
> soc: soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> --
> 2.20.1
>
next prev parent reply other threads:[~2019-08-20 12:24 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 6:42 [PATCH v2 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Vinod Koul
2019-08-20 6:42 ` [PATCH v2 1/8] arm64: dts: qcom: sm8150: add base dts file Vinod Koul
2019-08-20 12:27 ` Niklas Cassel
2019-08-20 12:33 ` Vinod Koul
2019-08-20 13:33 ` Amit Kucheria
2019-08-20 16:37 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 2/8] arm64: dts: qcom: pm8150: Add Base DTS file Vinod Koul
2019-08-20 12:27 ` Niklas Cassel
2019-08-20 12:34 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 3/8] arm64: dts: qcom: pm8150b: " Vinod Koul
2019-08-20 12:27 ` Niklas Cassel
2019-08-20 12:35 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 4/8] arm64: dts: qcom: pm8150l: " Vinod Koul
2019-08-20 6:42 ` [PATCH v2 5/8] arm64: dts: qcom: sm8150-mtp: add base dts file Vinod Koul
2019-08-20 12:26 ` Niklas Cassel
2019-08-20 12:36 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 6/8] arm64: dts: qcom: sm8150-mtp: Add regulators Vinod Koul
2019-08-20 12:26 ` Niklas Cassel
2019-08-20 12:37 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 7/8] arm64: dts: qcom: sm8150: Add reserved-memory regions Vinod Koul
2019-08-20 12:24 ` Niklas Cassel [this message]
2019-08-20 6:42 ` [PATCH v2 8/8] arm64: dts: qcom: sm8150: Add apps shared nodes Vinod Koul
2019-08-20 12:28 ` [PATCH v2 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Niklas Cassel
2019-08-20 12:39 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190820122437.GA28228@centauri \
--to=niklas.cassel@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sibis@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).