From: Niklas Cassel <niklas.cassel@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Boyd <sboyd@kernel.org>,
Sibi Sankar <sibis@codeaurora.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/8] arm64: dts: qcom: pm8150b: Add Base DTS file
Date: Tue, 20 Aug 2019 14:27:01 +0200 [thread overview]
Message-ID: <20190820122701.GC31261@centauri> (raw)
In-Reply-To: <20190820064216.8629-4-vkoul@kernel.org>
On Tue, Aug 20, 2019 at 12:12:11PM +0530, Vinod Koul wrote:
> PMIC pm8150b is a slave pmic and this adds base DTS file for pm8150b
> with pon, adc, and gpio nodes
All of your other commit messages refers to it as power-on
instead of pon, be consistent.
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> arch/arm64/boot/dts/qcom/pm8150b.dtsi | 84 +++++++++++++++++++++++++++
> 1 file changed, 84 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/pm8150b.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> new file mode 100644
> index 000000000000..dfb71fb8c90a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> @@ -0,0 +1,84 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> +// Copyright (c) 2019, Linaro Limited
> +
> +#include <dt-bindings/iio/qcom,spmi-vadc.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +&spmi_bus {
> + pmic@2 {
> + compatible = "qcom,pm8150b", "qcom,spmi-pmic";
> + reg = <0x2 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + power-on@800 {
> + compatible = "qcom,pm8916-pon";
> + reg = <0x0800>;
> +
> + status = "disabled";
> + };
> +
> + adc@3100 {
> + compatible = "qcom,spmi-adc5";
> + reg = <0x3100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> + status = "disabled";
> +
> + ref-gnd@0 {
> + reg = <ADC5_REF_GND>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_gnd";
> + };
> +
> + vref-1p25@1 {
> + reg = <ADC5_1P25VREF>;
> + qcom,pre-scaling = <1 1>;
> + label = "vref_1p25";
> + };
> +
> + die-temp@6 {
> + reg = <ADC5_DIE_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "die_temp";
> + };
> +
> + chg-temp@9 {
> + reg = <ADC5_CHG_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "chg_temp";
> + };
> + };
> +
> + pm8150b_gpios: gpio@c000 {
> + compatible = "qcom,pm8150b-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <0x2 0xc0 0 IRQ_TYPE_NONE>,
> + <0x2 0xc1 0 IRQ_TYPE_NONE>,
> + <0x2 0xc2 0 IRQ_TYPE_NONE>,
> + <0x2 0xc3 0 IRQ_TYPE_NONE>,
> + <0x2 0xc4 0 IRQ_TYPE_NONE>,
> + <0x2 0xc5 0 IRQ_TYPE_NONE>,
> + <0x2 0xc6 0 IRQ_TYPE_NONE>,
> + <0x2 0xc7 0 IRQ_TYPE_NONE>,
> + <0x2 0xc8 0 IRQ_TYPE_NONE>,
> + <0x2 0xc9 0 IRQ_TYPE_NONE>,
> + <0x2 0xca 0 IRQ_TYPE_NONE>,
> + <0x2 0xcb 0 IRQ_TYPE_NONE>;
> + };
> + };
> +
> + pmic@3 {
> + compatible = "qcom,pm8150b", "qcom,spmi-pmic";
> + reg = <0x3 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +};
> --
> 2.20.1
>
next prev parent reply other threads:[~2019-08-20 12:27 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 6:42 [PATCH v2 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Vinod Koul
2019-08-20 6:42 ` [PATCH v2 1/8] arm64: dts: qcom: sm8150: add base dts file Vinod Koul
2019-08-20 12:27 ` Niklas Cassel
2019-08-20 12:33 ` Vinod Koul
2019-08-20 13:33 ` Amit Kucheria
2019-08-20 16:37 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 2/8] arm64: dts: qcom: pm8150: Add Base DTS file Vinod Koul
2019-08-20 12:27 ` Niklas Cassel
2019-08-20 12:34 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 3/8] arm64: dts: qcom: pm8150b: " Vinod Koul
2019-08-20 12:27 ` Niklas Cassel [this message]
2019-08-20 12:35 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 4/8] arm64: dts: qcom: pm8150l: " Vinod Koul
2019-08-20 6:42 ` [PATCH v2 5/8] arm64: dts: qcom: sm8150-mtp: add base dts file Vinod Koul
2019-08-20 12:26 ` Niklas Cassel
2019-08-20 12:36 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 6/8] arm64: dts: qcom: sm8150-mtp: Add regulators Vinod Koul
2019-08-20 12:26 ` Niklas Cassel
2019-08-20 12:37 ` Vinod Koul
2019-08-20 6:42 ` [PATCH v2 7/8] arm64: dts: qcom: sm8150: Add reserved-memory regions Vinod Koul
2019-08-20 12:24 ` Niklas Cassel
2019-08-20 6:42 ` [PATCH v2 8/8] arm64: dts: qcom: sm8150: Add apps shared nodes Vinod Koul
2019-08-20 12:28 ` [PATCH v2 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Niklas Cassel
2019-08-20 12:39 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190820122701.GC31261@centauri \
--to=niklas.cassel@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sibis@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).