From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH 04/19] dt-bindings: phy-mmp3-usb: Add bindings Date: Wed, 21 Aug 2019 16:13:22 -0500 Message-ID: <20190821211322.GA12457@bogus> References: <20190809093158.7969-1-lkundrak@v3.sk> <20190809093158.7969-5-lkundrak@v3.sk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20190809093158.7969-5-lkundrak@v3.sk> Sender: linux-kernel-owner@vger.kernel.org To: Lubomir Rintel Cc: Olof Johansson , Mark Rutland , Thomas Gleixner , Jason Cooper , Marc Zyngier , Kishon Vijay Abraham I , Russell King , Michael Turquette , Stephen Boyd , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org List-Id: devicetree@vger.kernel.org On Fri, Aug 09, 2019 at 11:31:43AM +0200, Lubomir Rintel wrote: > This is the PHY chip for USB OTG on MMP3 platform. > > Signed-off-by: Lubomir Rintel > --- > .../devicetree/bindings/phy/phy-mmp3-usb.txt | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt > > diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt > new file mode 100644 > index 0000000000000..b9623b98151bc > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt > @@ -0,0 +1,16 @@ > +Marvell MMP3 USB PHY > +-------------------- > + > +Required properties: > +- compatible: must be "marvell,mmp3-usb-phy" > +- #phy-cells: must be 0 > + > +Example: > + usb-phy: usbphy@d4207000 { usb-phy@... > + compatible = "marvell,mmp3-usb-phy"; > + reg = <0xd4207000 0x40>; > + #phy-cells = <0>; > + }; > + > +This document explains the device tree binding. For general information > +about PHY subsystem refer to Documentation/phy.txt Drop this statement. > -- > 2.21.0 >