From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH v3 4/4] dt-bindings: iio: adc: Add AD7606B ADC documentation Date: Sun, 25 Aug 2019 18:26:53 +0100 Message-ID: <20190825182653.25a685d4@archlinux> References: <20190821141656.4815-1-beniamin.bia@analog.com> <20190821141656.4815-4-beniamin.bia@analog.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190821141656.4815-4-beniamin.bia@analog.com> Sender: linux-kernel-owner@vger.kernel.org To: Beniamin Bia Cc: lars@metafoo.de, Michael.Hennerich@analog.com, knaack.h@gmx.de, pmeerw@pmeerw.net, gregkh@linuxfoundation.org, linux-iio@vger.kernel.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, mark.rutland@arm.com, robh+dt@kernel.org, devicetree@vger.kernel.org, paulmck@linux.ibm.com, mchehab+samsung@kernel.org, linus.walleij@linaro.org, nicolas.ferre@microchip.com, biabeniamin@outlook.com List-Id: devicetree@vger.kernel.org On Wed, 21 Aug 2019 17:16:56 +0300 Beniamin Bia wrote: > Documentation for AD7606B Analog to Digital Converter and software > mode was added. > > Signed-off-by: Beniamin Bia Tweaked as per Peter's comment and added Rob's Reviewed-by from v2 Seems everyone decided to review this one just as you were posting the new version ;) Jonathan > --- > Changes in v3: > -nothing changed > > Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > index 509dbe9c84d2..2afe31747a70 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > @@ -13,6 +13,7 @@ maintainers: > description: | > Analog Devices AD7606 Simultaneous Sampling ADC > https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf > > properties: > @@ -22,6 +23,7 @@ properties: > - adi,ad7606-8 > - adi,ad7606-6 > - adi,ad7606-4 > + - adi,ad7606b > - adi,ad7616 > > reg: > @@ -87,7 +89,7 @@ properties: > > adi,sw-mode: > description: > - Software mode of operation, so far available only for ad7616. > + Software mode of operation, so far available only for ad7616 and ad7606B. > It is enabled when all three oversampling mode pins are connected to > high level. The device is configured by the corresponding registers. If the > adi,oversampling-ratio-gpios property is defined, then the driver will set the