Re: [PATCH 01/49] dt: bindings: net: add qcom,ath11k.txt

[Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Tue, Aug 20, 2019 at 06:47:27PM +0300, Kalle Valo wrote:

Missing commit message and Sob (and on the other patches).

> ---
>  .../bindings/net/wireless/qcom,ath11k.txt          | 127 +++++++++++++++++++++
>  1 file changed, 127 insertions(+)

Please use the DT schema format (YAML). See writing-schema.md.

> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt
> new file mode 100644
> index 000000000000..1824238b4b50
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt
> @@ -0,0 +1,127 @@
> +* Qualcomm Technologies ath11k wireless devices
> +
> +Required properties:
> +- compatible: Should be "qcom,ipq8074-wifi"
> +
> +AHB based ipq8074 uses most of the properties defined in this doc.
> +
> +Optional properties:
> +- reg: Address and length of the register set for the device.
> +- interrupts: List of interrupt lines. Must contain an entry
> +	      for each entry in the interrupt-names property.

Need to be explicit as to how many interrupts and what they are.

> +- interrupt-names: Must include the entries for CE interrupt
> +		   names ("ce0" to "ce11") and hw srng interrupt
> +		   names.
> +- qcom,rproc: DT entry of q6v5-wcss
> +
> +Example:
> +
> +wifi0: wifi@c000000 {
> +	compatible = "qcom,ipq8074-wifi";
> +	reg = <0xc000000 0x2000000>;
> +	interrupts = <0 320 1>,
> +		     <0 319 1>,
> +		     <0 318 1>,
> +		     <0 317 1>,
> +		     <0 316 1>,
> +		     <0 315 1>,
> +		     <0 314 1>,
> +		     <0 311 1>,
> +		     <0 310 1>,
> +		     <0 411 1>,
> +		     <0 410 1>,
> +		     <0 40 1>,
> +		     <0 39 1>,
> +		     <0 302 1>,
> +		     <0 301 1>,
> +		     <0 37 1>,
> +		     <0 36 1>,
> +		     <0 296 1>,
> +		     <0 295 1>,
> +		     <0 294 1>,
> +		     <0 293 1>,
> +		     <0 292 1>,
> +		     <0 291 1>,
> +		     <0 290 1>,
> +		     <0 289 1>,
> +		     <0 288 1>,
> +		     <0 239 1>,
> +		     <0 236 1>,
> +		     <0 235 1>,
> +		     <0 234 1>,
> +		     <0 233 1>,
> +		     <0 232 1>,
> +		     <0 231 1>,
> +		     <0 230 1>,
> +		     <0 229 1>,
> +		     <0 228 1>,
> +		     <0 224 1>,
> +		     <0 223 1>,
> +		     <0 203 1>,
> +		     <0 183 1>,
> +		     <0 180 1>,
> +		     <0 179 1>,
> +		     <0 178 1>,
> +		     <0 177 1>,
> +		     <0 176 1>,
> +		     <0 163 1>,
> +		     <0 162 1>,
> +		     <0 160 1>,
> +		     <0 159 1>,
> +		     <0 158 1>,
> +		     <0 157 1>,
> +		     <0 156 1>;
> +	interrupt-names = "misc-pulse1",
> +			  "misc-latch",
> +			  "sw-exception",
> +			  "watchdog",
> +			  "ce0",
> +			  "ce1",
> +			  "ce2",
> +			  "ce3",
> +			  "ce4",
> +			  "ce5",
> +			  "ce6",
> +			  "ce7",
> +			  "ce8",
> +			  "ce9",
> +			  "ce10",
> +			  "ce11",
> +			  "host2wbm-desc-feed",
> +			  "host2reo-re-injection",
> +			  "host2reo-command",
> +			  "host2rxdma-monitor-ring3",
> +			  "host2rxdma-monitor-ring2",
> +			  "host2rxdma-monitor-ring1",
> +			  "reo2ost-exception",
> +			  "wbm2host-rx-release",
> +			  "reo2host-status",
> +			  "reo2host-destination-ring4",
> +			  "reo2host-destination-ring3",
> +			  "reo2host-destination-ring2",
> +			  "reo2host-destination-ring1",
> +			  "rxdma2host-monitor-destination-mac3",
> +			  "rxdma2host-monitor-destination-mac2",
> +			  "rxdma2host-monitor-destination-mac1",
> +			  "ppdu-end-interrupts-mac3",
> +			  "ppdu-end-interrupts-mac2",
> +			  "ppdu-end-interrupts-mac1",
> +			  "rxdma2host-monitor-status-ring-mac3",
> +			  "rxdma2host-monitor-status-ring-mac2",
> +			  "rxdma2host-monitor-status-ring-mac1",
> +			  "host2rxdma-host-buf-ring-mac3",
> +			  "host2rxdma-host-buf-ring-mac2",
> +			  "host2rxdma-host-buf-ring-mac1",
> +			  "rxdma2host-destination-ring-mac3",
> +			  "rxdma2host-destination-ring-mac2",
> +			  "rxdma2host-destination-ring-mac1",
> +			  "host2tcl-input-ring4",
> +			  "host2tcl-input-ring3",
> +			  "host2tcl-input-ring2",
> +			  "host2tcl-input-ring1",
> +			  "wbm2host-tx-completions-ring3",
> +			  "wbm2host-tx-completions-ring2",
> +			  "wbm2host-tx-completions-ring1",
> +			  "tcl2host-status-ring";
> +	qcom,rproc = <&qcom_q6v5_wcss>;
> +};
>