[PATCH V2 3/6] PCI: tegra: Add support to configure sideband pins

[Vidya Sagar <vidyas@nvidia.com>]

Add support to configure sideband signal pins when information is present
in respective controller's device-tree node.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
V2:
* Addressed review comment from Andrew Murray
* Handled failure case of pinctrl_pm_select_default_state() cleanly

 drivers/pci/controller/dwc/pcie-tegra194.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index fc0dbeb31d78..057ba4f9fbcd 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1304,8 +1304,13 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
 	if (ret < 0) {
 		dev_err(dev, "Failed to get runtime sync for PCIe dev: %d\n",
 			ret);
-		pm_runtime_disable(dev);
-		return ret;
+		goto fail_pm_get_sync;
+	}
+
+	ret = pinctrl_pm_select_default_state(pcie->dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to configure sideband pins: %d\n", ret);
+		goto fail_pinctrl;
 	}
 
 	tegra_pcie_init_controller(pcie);
@@ -1332,7 +1337,9 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
 
 fail_host_init:
 	tegra_pcie_deinit_controller(pcie);
+fail_pinctrl:
 	pm_runtime_put_sync(dev);
+fail_pm_get_sync:
 	pm_runtime_disable(dev);
 	return ret;
 }
-- 
2.17.1