[PATCH 1/3] ARM: omap2plus_defconfig: Fix missing video

[PATCH 1/3] ARM: omap2plus_defconfig: Fix missing video

[Adam Ford]

When the panel-dpi driver was removed, the simple-panels driver
was never enabled, so anyone who used the panel-dpi driver lost
video, and those who used it inconjunction with simple-panels
would have to manually enable CONFIG_DRM_PANEL_SIMPLE.

This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same
way the deprecated panel-dpi was.

Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c7bf9c493646..64eb896907bf 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -363,6 +363,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
 CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
 CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_TILCDC=m
+CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
-- 
2.17.1

[PATCH 2/3] ARM: dts: logicpd-torpedo-baseboard: Fix missing video

[Adam Ford]

A previous commit removed the panel-dpi driver, which made the
Torpedo video stop working because it relied on the dpi driver
for setting video timings.  Now that the simple-panel driver is
available in omap2plus, this patch migrates the Torpedo dev kits
to use a similar panel and remove the manual timing requirements.

Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 642e809e757a..449cc7616da6 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -108,7 +108,6 @@
 &dss {
 	status = "ok";
 	vdds_dsi-supply = <&vpll2>;
-	vdda_video-supply = <&video_reg>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_dpi_pins1>;
 	port {
@@ -124,44 +123,20 @@
 		display0 = &lcd0;
 	};
 
-	video_reg: video_reg {
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pwr_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
-	};
-
 	lcd0: display {
-		compatible = "panel-dpi";
+		/* This isn't the exact LCD, but the timings meet spec */
+		/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
 		label = "15";
-		status = "okay";
-		/* default-on; */
 		pinctrl-names = "default";
-
+		pinctrl-0 = <&panel_pwr_pins>;
+		backlight = <&bl>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
 			};
 		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <4>;
-			vsync-len = <11>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
 	};
 
 	bl: backlight {
-- 
2.17.1

[PATCH 3/3] ARM: dts: am3517-evm: Fix missing video

[Adam Ford]

A previous commit removed the panel-dpi driver, which made the
video on the AM3517-evm stop working because it relied on the dpi
driver for setting video timings.  Now that the simple-panel driver
is available in omap2plus, this patch migrates the am3517-evm
to use a similar panel and remove the manual timing requirements.

Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index ebfe28c2f544..a1fd3e63e86e 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -124,10 +124,11 @@
 	};
 
 	lcd0: display@0 {
-		compatible = "panel-dpi";
+		/* This isn't the exact LCD, but the timings meet spec */
+		/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
 		label = "15";
-		status = "okay";
-		pinctrl-names = "default";
+		backlight = <&bl>;
 		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
 		vcc-supply = <&vdd_io_reg>;
 
@@ -136,22 +137,6 @@
 				remote-endpoint = <&dpi_out>;
 			};
 		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <4>;
-			vsync-len = <11>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
 	};
 
 	bl: backlight {
-- 
2.17.1

Re: [PATCH 1/3] ARM: omap2plus_defconfig: Fix missing video

[Tony Lindgren]

* Adam Ford <aford173@gmail.com> [190828 11:34]:
> When the panel-dpi driver was removed, the simple-panels driver
> was never enabled, so anyone who used the panel-dpi driver lost
> video, and those who used it inconjunction with simple-panels
> would have to manually enable CONFIG_DRM_PANEL_SIMPLE.
> 
> This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same
> way the deprecated panel-dpi was.
> 
> Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")

Applying all three into fixes. Not going to send out a pull
request for the fixes until next week so it may not land
until after the merge window starts. But looks like these
have been broken since 2018, so not super urgent.

Regards,

Tony