From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx Date: Fri, 6 Sep 2019 08:47:32 -0700 Message-ID: <20190906154732.GC52127@atomide.com> References: <20190905142734.GV52127@atomide.com> <4BC39938-D63E-4BDC-BA28-5132F77F602D@goldelico.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <4BC39938-D63E-4BDC-BA28-5132F77F602D@goldelico.com> Sender: linux-kernel-owner@vger.kernel.org To: "H. Nikolaus Schaller" Cc: Viresh Kumar , =?utf-8?Q?Beno=C3=AEt?= Cousson , Rob Herring , Adam Ford , =?utf-8?B?QW5kcsOp?= Roth , Mark Rutland , "Rafael J. Wysocki" , Linux-OMAP , devicetree , Linux Kernel Mailing List , linux-pm@vger.kernel.org, Discussions about the Letux Kernel , kernel@pyra-handheld.com List-Id: devicetree@vger.kernel.org * H. Nikolaus Schaller [190906 07:53]: > > Am 05.09.2019 um 16:27 schrieb Tony Lindgren : > > compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap34xx", "ti,omap3"; > > After thinking a little about the whole topic the main rule of this change must be: > > * do not break any existing in-tree DTS > => only *add* to compatible what we need to distinguish between omap34 and omap36 > > * additions shall only follow new scheme > => we only add "ti,omap34xx" or "ti,omap36xx" > but neither "ti,omap3630" nor "ti,omap3430" Sorry I don't follow you on this one.. We should always add "ti,omap3630" where "ti,omap36xx" is currently used so we can eventually get rid of "ti,omap36xx". And the same for 34xx. > * cover some out-of-tree DTS > => make the ti-cpufreq driver still match "ti,omap3430" or "ti,omap3630" > even if this duplicates compatibility > > This would mean that the logicpd-som-lv-37xx-devkit.dts gets the additional "ti,omap36xx" > while the omap3-ldp.dts would only get an "ti,omap34xx" but no "ti,omap3430" (since we > do not use it anywhere). > > Could you agree on this approach? Yeah sounds like logicpd-som-lv-37xx-devkit.dts currently still needs "ti,omap36xx" for now. If modifying omap3-ldp.dts, also add "ti,omap3430" in additon to "ti,omap34xx" that it already has. So basically let's assume the following: "ti,omap3430" == "ti,omap34xx" "ti,omap3630" == "ti,omap36xx" This means code needs to parse both. And eventually we just drop the "xx" variants. So while patching compatibles, let's also update for this to avoid multiple patches churning the same compatibles over and over. Regards, Tony