From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH] ARM: dts: imx6dl: SolidRun: add phy node with 100Mb/s max-speed Date: Sun, 15 Sep 2019 15:56:52 +0200 Message-ID: <20190915135652.GC3427@lunn.ch> References: <20190910155507.491230-1-tinywrkb@gmail.com> <20190910185033.GD9761@lunn.ch> <87muf6oyvr.fsf@tarshish> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <87muf6oyvr.fsf@tarshish> Sender: linux-kernel-owner@vger.kernel.org To: Baruch Siach Cc: tinywrkb , Mark Rutland , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , Shawn Guo , Sascha Hauer , Russell King , open list , Rob Herring , NXP Linux Team , Pengutronix Kernel Team , Fabio Estevam , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org > Tinywrkb confirmed to me in private communication that revert of > 5502b218e001 fixes Ethernet for him on effected system. > > He also referred me to an old Cubox-i spec that lists 10/100 Ethernet > only for i.MX6 Solo/DualLite variants of Cubox-i. It turns out that > there was a plan to use a different 10/100 PHY for Solo/DualLite > SOMs. This plan never materialized. All SolidRun i.MX6 SOMs use the same > AR8035 PHY that supports 1Gb. > > Commit 5502b218e001 might be triggering a hardware issue on the affected > Cubox-i. I could not reproduce the issue here with Cubox-i and a Dual > SOM variant running v5.3-rc8. I have no Solo/DualLite variant handy at > the moment. Could somebody with an affected device show us the output of ethtool with and without 5502b218e001. Does one show 1G has been negotiated, and the other 100Mbps? If this is true, how does it get 100Mbps without that patch? We are missing a piece of the puzzle. Andrew