From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adam Ford Subject: [PATCH 2/3] dt-bindings: Add Logic PD Type 28 display panel Date: Tue, 17 Sep 2019 11:12:12 -0500 Message-ID: <20190917161214.2913-2-aford173@gmail.com> References: <20190917161214.2913-1-aford173@gmail.com> Return-path: In-Reply-To: <20190917161214.2913-1-aford173@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: dri-devel@lists.freedesktop.org Cc: linux-omap@vger.kernel.org, adam.ford@logicpd.com, Adam Ford , Thierry Reding , Sam Ravnborg , David Airlie , Daniel Vetter , Rob Herring , Mark Rutland , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org This patch adds documentation of device tree bindings for the WVGA panel Logic PD Type 28 display. Signed-off-by: Adam Ford diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.txt b/Documentation/devicetree/bindings/display/panel/logicpd,type28.txt new file mode 100644 index 000000000000..829fc5210e06 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.txt @@ -0,0 +1,26 @@ +Logic PD Type 28 4.3" WQVGA TFT LCD panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Required properties: +- compatible: should be "logicpd,type28" + +Optional properties: +- power-supply: regulator to provide the supply voltage +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +Optional nodes: +- Video port for RGB input. + +Example: + lcd0: display { + compatible = "logicpd,type28"; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; -- 2.17.1