From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v3 07/15] dt-bindings: thermal: tsens: Convert over to a yaml schema Date: Tue, 17 Sep 2019 14:06:19 -0500 Message-ID: <20190917190619.GA9311@bogus> References: <933f033298cbd7726a6c0b4b3b6cc7adc81784ba.1568185732.git.amit.kucheria@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <933f033298cbd7726a6c0b4b3b6cc7adc81784ba.1568185732.git.amit.kucheria@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Amit Kucheria Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org, edubezval@gmail.com, agross@kernel.org, masneyb@onstation.org, swboyd@chromium.org, Daniel Lezcano , Mark Rutland , Zhang Rui , linux-pm@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On Wed, Sep 11, 2019 at 12:46:24PM +0530, Amit Kucheria wrote: > Document interrupt support in the tsens driver by converting over to a > YAML schema. > > Suggested-by: Stephen Boyd > Signed-off-by: Amit Kucheria > --- > .../bindings/thermal/qcom-tsens.txt | 55 ------ > .../bindings/thermal/qcom-tsens.yaml | 174 ++++++++++++++++++ > MAINTAINERS | 1 + > 3 files changed, 175 insertions(+), 55 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt > create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > new file mode 100644 > index 000000000000..6784766fe58f > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > @@ -0,0 +1,174 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR MIT) > +# Copyright 2019 Linaro Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: QCOM SoC Temperature Sensor (TSENS) > + > +maintainers: > + - Amit Kucheria > + > +description: | > + QCOM SoCs have TSENS IP to allow temperature measurement. There are currently > + three distinct major versions of the IP that is supported by a single driver. > + The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures > + everything before v1 when there was no versioning information. > + > +properties: > + compatible: > + oneOf: > + - description: v0.1 of TSENS > + items: > + - enum: > + - qcom,msm8916-tsens > + - qcom,msm8974-tsens > + - const: qcom,tsens-v0_1 > + > + - description: v1 of TSENS > + items: > + - enum: > + - qcom,qcs404-tsens > + - const: qcom,tsens-v1 > + > + - description: v2 of TSENS > + items: > + - enum: > + - qcom,msm8996-tsens > + - qcom,msm8998-tsens > + - qcom,sdm845-tsens > + - const: qcom,tsens-v2 > + > + reg: > + maxItems: 2 > + items: > + - description: TM registers > + - description: SROT registers > + > + nvmem-cells: > + minItems: 1 > + maxItems: 2 > + description: > + Reference to an nvmem node for the calibration data > + > + nvmem-cells-names: This is going to require 2 items, so you need an explicit minItems and maxItems. > + items: > + - enum: > + - caldata > + - calsel > + > + "#qcom,sensors": > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - minimum: 1 > + - maximum: 16 > + description: > + Number of sensors enabled on this platform > + > + "#thermal-sensor-cells": > + const: 1 > + description: > + Number of cells required to uniquely identify the thermal sensors. Since > + we have multiple sensors this is set to 1 > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,msm8916-tsens > + - qcom,msm8974-tsens > + - qcom,qcs404-tsens > + - qcom,tsens-v0_1 > + - qcom,tsens-v1 > + then: > + properties: > + interrupts: > + minItems: 1 > + maxItems: 1 These can be implicit. > + items: > + - description: Combined interrupt if upper or lower threshold crossed > + interrupt-names: > + minItems: 1 > + maxItems: 1 ditto. > + items: > + - const: uplow > + > + else: > + properties: > + interrupts: > + minItems: 2 > + maxItems: 2 ditto. > + items: > + - description: Combined interrupt if upper or lower threshold crossed > + - description: Interrupt if critical threshold crossed > + interrupt-names: > + minItems: 2 > + maxItems: 2 ditto. > + items: > + - const: uplow > + - const: critical > + > +required: > + - compatible > + - reg > + - "#qcom,sensors" > + - interrupts > + - interrupt-names > + - "#thermal-sensor-cells" > + > +examples: > + - | > + #include > + // Example 1 (legacy: for pre v1 IP): > + tsens1: thermal-sensor@900000 { > + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; > + reg = <0x4a9000 0x1000>, /* TM */ > + <0x4a8000 0x1000>; /* SROT */ > + > + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; > + nvmem-cell-names = "caldata", "calsel"; > + > + interrupts = ; > + interrupt-names = "uplow"; > + > + #qcom,sensors = <5>; > + #thermal-sensor-cells = <1>; > + }; > + > + - | > + #include > + // Example 2 (for any platform containing v1 of the TSENS IP): > + tsens2: thermal-sensor@4a9000 { > + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; > + reg = <0x004a9000 0x1000>, /* TM */ > + <0x004a8000 0x1000>; /* SROT */ > + > + nvmem-cells = <&tsens_caldata>; > + nvmem-cell-names = "calib"; > + > + interrupts = ; > + interrupt-names = "uplow"; > + > + #qcom,sensors = <10>; > + #thermal-sensor-cells = <1>; > + }; > + > + - | > + #include > + // Example 3 (for any platform containing v2 of the TSENS IP): > + tsens3: thermal-sensor@c263000 { > + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > + reg = <0xc263000 0x1ff>, > + <0xc222000 0x1ff>; > + > + interrupts = , > + ; > + interrupt-names = "uplow", "critical"; > + > + #qcom,sensors = <13>; > + #thermal-sensor-cells = <1>; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index e7a47b5210fd..ff757a4a060c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -13360,6 +13360,7 @@ L: linux-pm@vger.kernel.org > L: linux-arm-msm@vger.kernel.org > S: Maintained > F: drivers/thermal/qcom/ > +F: Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > > QUALCOMM VENUS VIDEO ACCELERATOR DRIVER > M: Stanimir Varbanov > -- > 2.17.1 >