[PATCH v2 01/11] dt-bindings: phy-mtk-tphy: add two optional properties for u2phy

[PATCH v2 01/11] dt-bindings: phy-mtk-tphy: add two optional properties for u2phy

[Chunfeng Yun]

Add two optional properties, one for tuning J-K voltage, another for
disconnect threshold, both of them are related with connect detection

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: change description
---
 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index a5f7a4f0dbc1..ce6abfbdfbe1 100644
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -52,6 +52,8 @@ Optional properties (PHY_TYPE_USB2 port (child) node):
 - mediatek,eye-vrt	: u32, the selection of VRT reference voltage
 - mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
 - mediatek,bc12	: bool, enable BC12 of u2phy if support it
+- mediatek,discth	: u32, the selection of disconnect threshold
+- mediatek,intr	: u32, the selection of internal R (resistance)
 
 Example:
 
-- 
2.23.0

[PATCH v2 02/11] dt-bindings: phy-mtk-tphy: make the ref clock optional

[Chunfeng Yun]

Make the ref clock optional, then we no need refer to a fixed-clock
in DTS anymore when the clock of USB3 PHY comes from oscillator
directly

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 .../devicetree/bindings/phy/phy-mtk-tphy.txt        | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index ce6abfbdfbe1..1f4a36dd80e0 100644
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -34,12 +34,6 @@ Optional properties (controller (parent) node):
 
 Required properties (port (child) node):
 - reg		: address and length of the register set for the port.
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: must contain
-		  "ref": 48M reference clock for HighSpeed analog phy; and 26M
-			reference clock for SuperSpeed analog phy, sometimes is
-			24M, 25M or 27M, depended on platform.
 - #phy-cells	: should be 1 (See second example)
 		  cell after port phandle is phy type from:
 			- PHY_TYPE_USB2
@@ -48,6 +42,13 @@ Required properties (port (child) node):
 			- PHY_TYPE_SATA
 
 Optional properties (PHY_TYPE_USB2 port (child) node):
+- clocks	: a list of phandle + clock-specifier pairs, one for each
+		  entry in clock-names
+- clock-names	: may contain
+		  "ref": 48M reference clock for HighSpeed anolog phy; and 26M
+			reference clock for SuperSpeed anolog phy, sometimes is
+			24M, 25M or 27M, depended on platform.
+
 - mediatek,eye-src	: u32, the value of slew rate calibrate
 - mediatek,eye-vrt	: u32, the selection of VRT reference voltage
 - mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
-- 
2.23.0

Re: [PATCH v2 02/11] dt-bindings: phy-mtk-tphy: make the ref clock optional

[Rob Herring]

On Fri, 30 Aug 2019 15:14:49 +0800, Chunfeng Yun wrote:
> Make the ref clock optional, then we no need refer to a fixed-clock
> in DTS anymore when the clock of USB3 PHY comes from oscillator
> directly
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2: no changes
> ---
>  .../devicetree/bindings/phy/phy-mtk-tphy.txt        | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v2 03/11] dt-bindings: phy-mtk-tphy: remove unused u3phya_ref clock

[Chunfeng Yun]

The u3phya_ref clock is already moved into sub-node, and
renamed as ref clock, no used anymore now, so remove it
to avoid confusion

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v2: add Reviewed-by Rob
---
 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index 1f4a36dd80e0..48bc1a2e9299 100644
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -13,10 +13,6 @@ Required properties (controller (parent) node):
 		  "mediatek,mt8173-u3phy";
 		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
 		  "mediatek,generic-tphy-v2" on mt2712 instead.
- - clocks	: (deprecated, use port's clocks instead) a list of phandle +
-		  clock-specifier pairs, one for each entry in clock-names
- - clock-names	: (deprecated, use port's one instead) must contain
-		  "u3phya_ref": for reference clock of usb3.0 analog phy.
 
 Required nodes	: a sub-node is required for each port the controller
 		  provides. Address range information including the usual
-- 
2.23.0

[PATCH v2 04/11] dt-bindings: phy-mtk-tphy: add a new reference clock

[Chunfeng Yun]

Usually the digital and analog phys use the same reference clock,
but on some platforms, they are separated, so add another optional
clock to support it.
In order to keep the clock names consistent with PHY IP's, use
the da_ref for analog phy and ref clock for digital phy.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: fix typo of analog and needed
---
 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index 48bc1a2e9299..a859b0db4051 100644
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -41,9 +41,12 @@ Optional properties (PHY_TYPE_USB2 port (child) node):
 - clocks	: a list of phandle + clock-specifier pairs, one for each
 		  entry in clock-names
 - clock-names	: may contain
-		  "ref": 48M reference clock for HighSpeed anolog phy; and 26M
-			reference clock for SuperSpeed anolog phy, sometimes is
+		  "ref": 48M reference clock for HighSpeed (digital) phy; and 26M
+			reference clock for SuperSpeed (digital) phy, sometimes is
 			24M, 25M or 27M, depended on platform.
+		  "da_ref": the reference clock of analog phy, used if the clocks
+			of analog and digital phys are separated, otherwise uses
+			"ref" clock only if needed.
 
 - mediatek,eye-src	: u32, the value of slew rate calibrate
 - mediatek,eye-vrt	: u32, the selection of VRT reference voltage
-- 
2.23.0

Re: [PATCH v2 04/11] dt-bindings: phy-mtk-tphy: add a new reference clock

[Rob Herring]

On Fri, 30 Aug 2019 15:14:51 +0800, Chunfeng Yun wrote:
> Usually the digital and analog phys use the same reference clock,
> but on some platforms, they are separated, so add another optional
> clock to support it.
> In order to keep the clock names consistent with PHY IP's, use
> the da_ref for analog phy and ref clock for digital phy.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2: fix typo of analog and needed
> ---
>  Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 04/11] dt-bindings: phy-mtk-tphy: add a new reference clock

[Kishon Vijay Abraham I]

Hi Rob,

On 18/09/19 1:58 AM, Rob Herring wrote:
> On Fri, 30 Aug 2019 15:14:51 +0800, Chunfeng Yun wrote:
>> Usually the digital and analog phys use the same reference clock,
>> but on some platforms, they are separated, so add another optional
>> clock to support it.
>> In order to keep the clock names consistent with PHY IP's, use
>> the da_ref for analog phy and ref clock for digital phy.
>>
>> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
>> ---
>> v2: fix typo of analog and needed
>> ---
>>  Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 7 +++++--
>>  1 file changed, 5 insertions(+), 2 deletions(-)
>>
> 
> Acked-by: Rob Herring <robh@kernel.org>

I see you've acked a couple of patches in the series. However the other
dt-binding patch neither has an Ack or NAK. Is there a specific reason or can I
merge the series?

Thanks
Kishon

Re: [PATCH v2 04/11] dt-bindings: phy-mtk-tphy: add a new reference clock

[Chunfeng Yun]

Hi Rob,

On Wed, 2019-10-23 at 11:10 +0530, Kishon Vijay Abraham I wrote:
> Hi Rob,
> 
> On 18/09/19 1:58 AM, Rob Herring wrote:
> > On Fri, 30 Aug 2019 15:14:51 +0800, Chunfeng Yun wrote:
> >> Usually the digital and analog phys use the same reference clock,
> >> but on some platforms, they are separated, so add another optional
> >> clock to support it.
> >> In order to keep the clock names consistent with PHY IP's, use
> >> the da_ref for analog phy and ref clock for digital phy.
> >>
> >> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> >> ---
> >> v2: fix typo of analog and needed
> >> ---
> >>  Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 7 +++++--
> >>  1 file changed, 5 insertions(+), 2 deletions(-)
> >>
> > 
> > Acked-by: Rob Herring <robh@kernel.org>
> 
> I see you've acked a couple of patches in the series. However the other
> dt-binding patch neither has an Ack or NAK. Is there a specific reason or can I
> merge the series?

Ping?

> 
> Thanks
> Kishon

[PATCH v2 05/11] dt-bindings: phy-mtk-tphy: add the properties about address mapping

[Chunfeng Yun]

Add three required properties about the address mapping, including
'#address-cells', '#size-cells' and 'ranges'

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v2: add Reviewed-by Rob
---
 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index a859b0db4051..dd75b676b71d 100644
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -14,6 +14,16 @@ Required properties (controller (parent) node):
 		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
 		  "mediatek,generic-tphy-v2" on mt2712 instead.
 
+- #address-cells:	the number of cells used to represent physical
+		base addresses.
+- #size-cells:	the number of cells used to represent the size of an address.
+- ranges:	the address mapping relationship to the parent, defined with
+		- empty value: if optional 'reg' is used.
+		- non-empty value: if optional 'reg' is not used. should set
+			the child's base address to 0, the physical address
+			within parent's address space, and the length of
+			the address map.
+
 Required nodes	: a sub-node is required for each port the controller
 		  provides. Address range information including the usual
 		  'reg' property is used inside these nodes to describe
-- 
2.23.0

[PATCH v2 06/11] phy: phy-mtk-tphy: add a property for disconnect threshold

[Chunfeng Yun]

This is used to tune the threshold of disconnect

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 drivers/phy/mediatek/phy-mtk-tphy.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index cb2ed3b25068..5afe33621dbc 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -60,6 +60,8 @@
 #define U3P_USBPHYACR6		0x018
 #define PA6_RG_U2_BC11_SW_EN		BIT(23)
 #define PA6_RG_U2_OTG_VBUSCMP_EN	BIT(20)
+#define PA6_RG_U2_DISCTH		GENMASK(7, 4)
+#define PA6_RG_U2_DISCTH_VAL(x)	((0xf & (x)) << 4)
 #define PA6_RG_U2_SQTH		GENMASK(3, 0)
 #define PA6_RG_U2_SQTH_VAL(x)	(0xf & (x))
 
@@ -300,6 +302,7 @@ struct mtk_phy_instance {
 	int eye_src;
 	int eye_vrt;
 	int eye_term;
+	int discth;
 	bool bc12_en;
 };
 
@@ -850,9 +853,12 @@ static void phy_parse_property(struct mtk_tphy *tphy,
 				 &instance->eye_vrt);
 	device_property_read_u32(dev, "mediatek,eye-term",
 				 &instance->eye_term);
-	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d\n",
+	device_property_read_u32(dev, "mediatek,discth",
+				 &instance->discth);
+	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, disc:%d\n",
 		instance->bc12_en, instance->eye_src,
-		instance->eye_vrt, instance->eye_term);
+		instance->eye_vrt, instance->eye_term,
+		instance->discth);
 }
 
 static void u2_phy_props_set(struct mtk_tphy *tphy,
@@ -888,6 +894,13 @@ static void u2_phy_props_set(struct mtk_tphy *tphy,
 		tmp |= PA1_RG_TERM_SEL_VAL(instance->eye_term);
 		writel(tmp, com + U3P_USBPHYACR1);
 	}
+
+	if (instance->discth) {
+		tmp = readl(com + U3P_USBPHYACR6);
+		tmp &= ~PA6_RG_U2_DISCTH;
+		tmp |= PA6_RG_U2_DISCTH_VAL(instance->discth);
+		writel(tmp, com + U3P_USBPHYACR6);
+	}
 }
 
 static int mtk_phy_init(struct phy *phy)
-- 
2.23.0

[PATCH v2 07/11] phy: phy-mtk-tphy: add a property for internal resistance

[Chunfeng Yun]

This is used to tune internal resistance for J-K test

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 drivers/phy/mediatek/phy-mtk-tphy.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 5afe33621dbc..4a2dc92f10f5 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -43,6 +43,8 @@
 #define PA0_RG_USB20_INTR_EN		BIT(5)
 
 #define U3P_USBPHYACR1		0x004
+#define PA1_RG_INTR_CAL		GENMASK(23, 19)
+#define PA1_RG_INTR_CAL_VAL(x)	((0x1f & (x)) << 19)
 #define PA1_RG_VRT_SEL			GENMASK(14, 12)
 #define PA1_RG_VRT_SEL_VAL(x)	((0x7 & (x)) << 12)
 #define PA1_RG_TERM_SEL		GENMASK(10, 8)
@@ -302,6 +304,7 @@ struct mtk_phy_instance {
 	int eye_src;
 	int eye_vrt;
 	int eye_term;
+	int intr;
 	int discth;
 	bool bc12_en;
 };
@@ -853,12 +856,14 @@ static void phy_parse_property(struct mtk_tphy *tphy,
 				 &instance->eye_vrt);
 	device_property_read_u32(dev, "mediatek,eye-term",
 				 &instance->eye_term);
+	device_property_read_u32(dev, "mediatek,intr",
+				 &instance->intr);
 	device_property_read_u32(dev, "mediatek,discth",
 				 &instance->discth);
-	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, disc:%d\n",
+	dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, intr:%d, disc:%d\n",
 		instance->bc12_en, instance->eye_src,
 		instance->eye_vrt, instance->eye_term,
-		instance->discth);
+		instance->intr, instance->discth);
 }
 
 static void u2_phy_props_set(struct mtk_tphy *tphy,
@@ -895,6 +900,13 @@ static void u2_phy_props_set(struct mtk_tphy *tphy,
 		writel(tmp, com + U3P_USBPHYACR1);
 	}
 
+	if (instance->intr) {
+		tmp = readl(com + U3P_USBPHYACR1);
+		tmp &= ~PA1_RG_INTR_CAL;
+		tmp |= PA1_RG_INTR_CAL_VAL(instance->intr);
+		writel(tmp, com + U3P_USBPHYACR1);
+	}
+
 	if (instance->discth) {
 		tmp = readl(com + U3P_USBPHYACR6);
 		tmp &= ~PA6_RG_U2_DISCTH;
-- 
2.23.0

[PATCH v2 08/11] phy: phy-mtk-tphy: make the ref clock optional

[Chunfeng Yun]

Sometimes the reference clock of USB3 PHY comes from oscillator
directly, and no need refer to a fixed-clock in DTS anymore
if make it optional.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 4a2dc92f10f5..96c62e3a3300 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -1182,7 +1182,7 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 		if (tphy->u3phya_ref)
 			continue;
 
-		instance->ref_clk = devm_clk_get(&phy->dev, "ref");
+		instance->ref_clk = devm_clk_get_optional(&phy->dev, "ref");
 		if (IS_ERR(instance->ref_clk)) {
 			dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
 			retval = PTR_ERR(instance->ref_clk);
-- 
2.23.0

[PATCH v2 09/11] phy: phy-mtk-tphy: remove unused u3phya_ref clock

[Chunfeng Yun]

The u3phya_ref clock is already moved into sub-node, and
renamed as ref clock, no used anymore now, so remove it,
this can avoid confusion when support new platforms

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: no changes
---
 drivers/phy/mediatek/phy-mtk-tphy.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 96c62e3a3300..c6424fd2a06d 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -312,8 +312,6 @@ struct mtk_phy_instance {
 struct mtk_tphy {
 	struct device *dev;
 	void __iomem *sif_base;	/* only shared sif */
-	/* deprecated, use @ref_clk instead in phy instance */
-	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
 	const struct mtk_phy_pdata *pdata;
 	struct mtk_phy_instance **phys;
 	int nphys;
@@ -921,12 +919,6 @@ static int mtk_phy_init(struct phy *phy)
 	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 	int ret;
 
-	ret = clk_prepare_enable(tphy->u3phya_ref);
-	if (ret) {
-		dev_err(tphy->dev, "failed to enable u3phya_ref\n");
-		return ret;
-	}
-
 	ret = clk_prepare_enable(instance->ref_clk);
 	if (ret) {
 		dev_err(tphy->dev, "failed to enable ref_clk\n");
@@ -992,7 +984,6 @@ static int mtk_phy_exit(struct phy *phy)
 		u2_phy_instance_exit(tphy, instance);
 
 	clk_disable_unprepare(instance->ref_clk);
-	clk_disable_unprepare(tphy->u3phya_ref);
 	return 0;
 }
 
@@ -1127,11 +1118,6 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* it's deprecated, make it optional for backward compatibility */
-	tphy->u3phya_ref = devm_clk_get_optional(dev, "u3phya_ref");
-	if (IS_ERR(tphy->u3phya_ref))
-		return PTR_ERR(tphy->u3phya_ref);
-
 	tphy->src_ref_clk = U3P_REF_CLK;
 	tphy->src_coef = U3P_SLEW_RATE_COEF;
 	/* update parameters of slew rate calibrate if exist */
@@ -1178,10 +1164,6 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 		phy_set_drvdata(phy, instance);
 		port++;
 
-		/* if deprecated clock is provided, ignore instance's one */
-		if (tphy->u3phya_ref)
-			continue;
-
 		instance->ref_clk = devm_clk_get_optional(&phy->dev, "ref");
 		if (IS_ERR(instance->ref_clk)) {
 			dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
-- 
2.23.0

[PATCH v2 10/11] phy: phy-mtk-tphy: add a new reference clock

[Chunfeng Yun]

Usually the digital and analog phys use the same reference clock,
but some platforms have two separate reference clocks for each of
them, so add another optional clock to support them.
In order to keep the clock names consistent with PHY IP's, change
the da_ref for analog phy and ref clock for digital phy.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: fix typo of analog
---
 drivers/phy/mediatek/phy-mtk-tphy.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index c6424fd2a06d..cdbcc49f7115 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -298,7 +298,8 @@ struct mtk_phy_instance {
 		struct u2phy_banks u2_banks;
 		struct u3phy_banks u3_banks;
 	};
-	struct clk *ref_clk;	/* reference clock of anolog phy */
+	struct clk *ref_clk;	/* reference clock of (digital) phy */
+	struct clk *da_ref_clk;	/* reference clock of analog phy */
 	u32 index;
 	u8 type;
 	int eye_src;
@@ -925,6 +926,13 @@ static int mtk_phy_init(struct phy *phy)
 		return ret;
 	}
 
+	ret = clk_prepare_enable(instance->da_ref_clk);
+	if (ret) {
+		dev_err(tphy->dev, "failed to enable da_ref\n");
+		clk_disable_unprepare(instance->ref_clk);
+		return ret;
+	}
+
 	switch (instance->type) {
 	case PHY_TYPE_USB2:
 		u2_phy_instance_init(tphy, instance);
@@ -984,6 +992,7 @@ static int mtk_phy_exit(struct phy *phy)
 		u2_phy_instance_exit(tphy, instance);
 
 	clk_disable_unprepare(instance->ref_clk);
+	clk_disable_unprepare(instance->da_ref_clk);
 	return 0;
 }
 
@@ -1170,6 +1179,14 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 			retval = PTR_ERR(instance->ref_clk);
 			goto put_child;
 		}
+
+		instance->da_ref_clk =
+			devm_clk_get_optional(&phy->dev, "da_ref");
+		if (IS_ERR(instance->da_ref_clk)) {
+			dev_err(dev, "failed to get da_ref_clk(id-%d)\n", port);
+			retval = PTR_ERR(instance->da_ref_clk);
+			goto put_child;
+		}
 	}
 
 	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
-- 
2.23.0

[PATCH v2 11/11] arm64: dts: mt2712: use non-empty ranges for usb-phy

[Chunfeng Yun]

Use non-empty ranges for usb-phy to make the layout of
its registers clearer;
Replace deprecated compatible by generic

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: use generic compatible
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 42 ++++++++++++-----------
 1 file changed, 22 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 43307bad3f0d..e24f2f2f6004 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -697,30 +697,31 @@
 	};
 
 	u3phy0: usb-phy@11290000 {
-		compatible = "mediatek,mt2712-u3phy";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+		compatible = "mediatek,mt2712-tphy",
+			     "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x11290000 0x9000>;
 		status = "okay";
 
-		u2port0: usb-phy@11290000 {
-			reg = <0 0x11290000 0 0x700>;
+		u2port0: usb-phy@0 {
+			reg = <0x0 0x700>;
 			clocks = <&clk26m>;
 			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
-		u2port1: usb-phy@11298000 {
-			reg = <0 0x11298000 0 0x700>;
+		u2port1: usb-phy@8000 {
+			reg = <0x8000 0x700>;
 			clocks = <&clk26m>;
 			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
-		u3port0: usb-phy@11298700 {
-			reg = <0 0x11298700 0 0x900>;
+		u3port0: usb-phy@8700 {
+			reg = <0x8700 0x900>;
 			clocks = <&clk26m>;
 			clock-names = "ref";
 			#phy-cells = <1>;
@@ -760,30 +761,31 @@
 	};
 
 	u3phy1: usb-phy@112e0000 {
-		compatible = "mediatek,mt2712-u3phy";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+		compatible = "mediatek,mt2712-tphy",
+			     "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x112e0000 0x9000>;
 		status = "okay";
 
-		u2port2: usb-phy@112e0000 {
-			reg = <0 0x112e0000 0 0x700>;
+		u2port2: usb-phy@0 {
+			reg = <0x0 0x700>;
 			clocks = <&clk26m>;
 			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
-		u2port3: usb-phy@112e8000 {
-			reg = <0 0x112e8000 0 0x700>;
+		u2port3: usb-phy@8000 {
+			reg = <0x8000 0x700>;
 			clocks = <&clk26m>;
 			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
-		u3port1: usb-phy@112e8700 {
-			reg = <0 0x112e8700 0 0x900>;
+		u3port1: usb-phy@8700 {
+			reg = <0x8700 0x900>;
 			clocks = <&clk26m>;
 			clock-names = "ref";
 			#phy-cells = <1>;
-- 
2.23.0