From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Kemnade Subject: [PATCH 0/3] dts: ARM: add Kobo Clara HD eBook reader Date: Fri, 27 Sep 2019 08:14:20 +0200 Message-ID: <20190927061423.17278-1-andreas@kemnade.info> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, manivannan.sadhasivam@linaro.org, andrew.smirnov@gmail.com, marex@denx.de, angus@akkea.ca, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, j.neuschaefer@gmx.net, Discussions about the Letux Kernel Cc: Andreas Kemnade List-Id: devicetree@vger.kernel.org This adds a device tree for the Kobo Clara HD eBook reader. Name on mainboard is: 37NB-E60K00+4A4 Serials start with: E60K02 (a number also seen in vendor kernel sources) These boards are also found in the Tolino Shine 3 reader but equipped with a i.MX6SL processor. Support for that device is planned to be added in a later patch series. To prepare for that the device tree is split up into a board file containing SoC-independent stuff and a file containing the SoC-dependent stuff. Work is based on code from the vendor kernel at https://github.com/kobolabs/Kobo-Reader/blob/master/hw/imx6sll-clara/kernel.tar.bz2 but things need to be heavily reworked due to incompatible bindings and to prepare for Tolino Shine 3 Andreas Kemnade (3): ARM: dts: add Netronix E60K02 board common file dt-bindings: arm: fsl: add compatible string for Kobo Clara HD ARM: dts: imx: add devicetree for Kobo Clara HD .../devicetree/bindings/arm/fsl.yaml | 1 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/e60k02.dtsi | 339 ++++++++++++++++++ arch/arm/boot/dts/imx6sll-kobo-clarahd.dts | 275 ++++++++++++++ 4 files changed, 617 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/e60k02.dtsi create mode 100644 arch/arm/boot/dts/imx6sll-kobo-clarahd.dts -- 2.20.1