From mboxrd@z Thu Jan  1 00:00:00 1970
From: Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH 4/7] dt-bindings: interrupt-controller: Add brcm,bcm7211-l1-intc binding
Date: Tue,  1 Oct 2019 15:48:39 -0700
Message-ID: <20191001224842.9382-5-f.fainelli@gmail.com>
References: <20191001224842.9382-1-f.fainelli@gmail.com>
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20191001224842.9382-1-f.fainelli@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
To: linux-kernel@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>, Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, "maintainer:BROADCOM
        BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE..." <bcm-kernel-feedback-list@broadcom.com>, Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>, "open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, "moderated list:BROADCOM BCM2835
        ARM ARCHITECTURE" <linux-rpi-kernel@lists.infradead.org>, "moderated list:BROADCOM BCM2835
        ARM ARCHITECTURE" <linux-arm-kernel@lists.infradead.org>
List-Id: devicetree@vger.kernel.org

BCM7211 uses a very similar root interrupt controller than what exists on
BCM2836, define a specific compatible string to key off specific
behavior.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
index 8ced1696c325..13bef028d6ad 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -7,7 +7,9 @@ controller.
 
 Required properties:
 
-- compatible:	 	Should be "brcm,bcm2836-l1-intc"
+- compatible:	 	Should be one of
+			"brcm,bcm2836-l1-intc"
+			"brcm,bcm7211-l1-intc"
 - reg:			Specifies base physical address and size of the
 			  registers
 - interrupt-controller:	Identifies the node as an interrupt controller
-- 
2.17.1