From mboxrd@z Thu Jan 1 00:00:00 1970 From: Priit Laes Subject: Re: [linux-sunxi] [PATCH v2 04/11] ARM: dts: sun8i: R40: add crypto engine node Date: Wed, 2 Oct 2019 08:08:27 +0000 Message-ID: <20191002080827.GB6347@plaes.org> References: <20191001184141.27956-1-clabbe.montjoie@gmail.com> <20191001184141.27956-5-clabbe.montjoie@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20191001184141.27956-5-clabbe.montjoie@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Corentin Labbe Cc: catalin.marinas@arm.com, davem@davemloft.net, herbert@gondor.apana.org.au, linux@armlinux.org.uk, mark.rutland@arm.com, mripard@kernel.org, robh+dt@kernel.org, wens@csie.org, will@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com List-Id: devicetree@vger.kernel.org On Tue, Oct 01, 2019 at 08:41:34PM +0200, Corentin Labbe wrote: > The Crypto Engine is a hardware cryptographic offloader that supports > many algorithms. > It could be found on most Allwinner SoCs. > > This patch enables the Crypto Engine on the Allwinner R40 SoC Device-tree. > > Signed-off-by: Corentin Labbe > --- > arch/arm/boot/dts/sun8i-r40.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi > index bde068111b85..1fc3297a55ec 100644 > --- a/arch/arm/boot/dts/sun8i-r40.dtsi > +++ b/arch/arm/boot/dts/sun8i-r40.dtsi > @@ -266,6 +266,16 @@ > #phy-cells = <1>; > }; > > + crypto: crypto-engine@1c15000 { All the other .dtsi files have `crypto: crypto@...` instead of crypto-engine. > + compatible = "allwinner,sun8i-r40-crypto"; > + reg = <0x01c15000 0x1000>; > + interrupts = ; > + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; > + clock-names = "bus", "mod"; > + resets = <&ccu RST_BUS_CE>; > + reset-names = "bus"; > + }; > + > ehci1: usb@1c19000 { > compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; > reg = <0x01c19000 0x100>; > -- > 2.21.0 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20191001184141.27956-5-clabbe.montjoie%40gmail.com.