From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kamel Bouhara Subject: [PATCH 1/4] dt-bindings: i2c: at91: document optional bus recovery properties Date: Wed, 2 Oct 2019 16:46:55 +0200 Message-ID: <20191002144658.7718-2-kamel.bouhara@bootlin.com> References: <20191002144658.7718-1-kamel.bouhara@bootlin.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20191002144658.7718-1-kamel.bouhara@bootlin.com> Sender: linux-kernel-owner@vger.kernel.org To: Wolfram Sang , linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, Thomas Petazzoni , Kamel Bouhara List-Id: devicetree@vger.kernel.org The at91 I2C controller can support bus recovery by re-assigning SCL and SDA to gpios. Add the optional pinctrl and gpio properties to do so. Signed-off-by: Kamel Bouhara --- Documentation/devicetree/bindings/i2c/i2c-at91.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index b7cec17c3daf..8ea2ce5d8610 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -19,8 +19,13 @@ Optional properties: capable I2C controllers. - i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" and "atmel,sama5d2-i2c". +- scl-gpios: specify the gpio related to SCL pin +- sda-gpios: specify the gpio related to SDA pin +- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c + bus recovery, call it "gpio" state - Child nodes conforming to i2c bus binding + Examples : i2c0: i2c@fff84000 { @@ -55,6 +60,11 @@ i2c0: i2c@f8034600 { clocks = <&flx0>; atmel,fifo-size = <16>; i2c-sda-hold-time-ns = <336>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; wm8731: wm8731@1a { compatible = "wm8731"; -- 2.23.0