From: Benoit Parrot <bparrot@ti.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com>
Subject: [Patch v2 08/21] media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic
Date: Fri, 4 Oct 2019 11:29:39 -0500 [thread overview]
Message-ID: <20191004162952.4963-9-bparrot@ti.com> (raw)
In-Reply-To: <20191004162952.4963-1-bparrot@ti.com>
v4l2-compliance fails with this message:
warn: v4l2-test-formats.cpp(717): \
TRY_FMT cannot handle an invalid pixelformat.
test VIDIOC_TRY_FMT: FAIL
This causes the following kernel panic:
Unable to handle kernel paging request at virtual address 56595561
pgd = ecd80e00
*pgd=00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task: ece44d80 task.stack: ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8
Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.
Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/media/platform/ti-vpe/vpe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index bbbf11174e16..1278d457f753 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1650,7 +1650,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
&pix->height, MIN_H, MAX_H, H_ALIGN,
S_ALIGN);
- if (!pix->num_planes)
+ if (!pix->num_planes || pix->num_planes > 2)
pix->num_planes = fmt->coplanar ? 2 : 1;
else if (pix->num_planes > 1 && !fmt->coplanar)
pix->num_planes = 1;
--
2.17.1
next prev parent reply other threads:[~2019-10-04 16:29 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-04 16:29 [Patch v2 00/21] media: vpe: maintenance Benoit Parrot
2019-10-04 16:29 ` [Patch v2 01/21] media: ti-vpe: Fix a parallel build issue Benoit Parrot
2019-10-04 16:29 ` [Patch v2 02/21] media: ti-vpe: vpe: Fix Motion Vector vpdma stride Benoit Parrot
2019-10-04 16:29 ` [Patch v2 03/21] media: ti-vpe: vpe: Add missing null pointer checks Benoit Parrot
2019-10-04 16:29 ` [Patch v2 04/21] media: ti-vpe: vpe: Remove unnecessary use of container_of Benoit Parrot
2019-10-04 16:29 ` [Patch v2 05/21] media: ti-vpe: Add support for SEQ_BT Benoit Parrot
2019-10-04 16:29 ` [Patch v2 06/21] media: ti-vpe: Add support for NV21 format Benoit Parrot
2019-10-04 16:29 ` [Patch v2 07/21] media: ti-vpe: Set MAX height supported to 2048 pixels Benoit Parrot
2019-10-04 16:29 ` Benoit Parrot [this message]
2019-10-04 16:29 ` [Patch v2 09/21] media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format Benoit Parrot
2019-10-04 16:29 ` [Patch v2 10/21] media: ti-vpe: vpe: Make sure YUYV is set as default format Benoit Parrot
2019-10-04 16:29 ` [Patch v2 11/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage Benoit Parrot
2019-10-04 16:29 ` [Patch v2 12/21] media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number Benoit Parrot
2019-10-04 16:29 ` [Patch v2 13/21] media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases Benoit Parrot
2019-10-04 16:29 ` [Patch v2 14/21] media: ti-vpe: vpdma: Use fixed type for address in descriptor Benoit Parrot
2019-10-04 16:29 ` [Patch v2 15/21] media: ti-vpe: Set the DMA mask and coherent mask Benoit Parrot
2019-10-04 16:29 ` [Patch v2 16/21] media: ti-vpe: vpe: use standard struct instead of duplicating fields Benoit Parrot
2019-10-07 7:57 ` Hans Verkuil
2019-10-07 12:45 ` Benoit Parrot
2019-10-04 16:29 ` [Patch v2 17/21] media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func Benoit Parrot
2019-10-04 16:29 ` [Patch v2 18/21] media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong Benoit Parrot
2019-10-04 16:29 ` [Patch v2 19/21] media: v4l2-common: add pixel encoding support Benoit Parrot
2019-10-05 0:46 ` kbuild test robot
2019-10-05 2:45 ` kbuild test robot
2019-10-07 8:06 ` Hans Verkuil
2019-10-07 12:52 ` Benoit Parrot
2019-10-04 16:29 ` [Patch v2 20/21] media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info Benoit Parrot
2019-10-04 16:29 ` [Patch v2 21/21] media: ti-vpe: vpe: don't rely on colorspace member for conversion Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191004162952.4963-9-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).