From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anand Moon <linux.amoon@gmail.com>
Subject: [RFCv1 1/5] arm64: dts: meson: Add missing 5V_EN gpio signal for VCC5V regulator
Date: Mon,  7 Oct 2019 13:16:45 +0000
Message-ID: <20191007131649.1768-2-linux.amoon@gmail.com>
References: <20191007131649.1768-1-linux.amoon@gmail.com>
Mime-Version: 1.0
Content-Transfer-Encoding: 8bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20191007131649.1768-1-linux.amoon@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Kevin Hilman <khilman@baylibre.com>, Martin Blumenstingl <martin.blumenstingl@googlemail.com>, Jerome Brunet <jbrunet@baylibre.com>, Neil Armstrong <narmstrong@baylibre.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
List-Id: devicetree@vger.kernel.org

As per schematics add missing 5V_EN gpio signal to enable
VCC5V regulator node.

Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 42f15405750c..a9a661258886 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -94,6 +94,9 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 		vin-supply = <&main_12v>;
+		/* U12 NB679GD 5V_EN */
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
 	};
 
 	vcc_1v8: regulator-vcc_1v8 {
-- 
2.23.0