From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sasha Levin Subject: [PATCH AUTOSEL 5.3 14/68] ARM: dts: Fix gpio0 flags for am335x-icev2 Date: Wed, 9 Oct 2019 13:04:53 -0400 Message-ID: <20191009170547.32204-14-sashal@kernel.org> References: <20191009170547.32204-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20191009170547.32204-1-sashal@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Tony Lindgren , Lokesh Vutla , Suman Anna , Sasha Levin , linux-omap@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org From: Tony Lindgren [ Upstream commit 4ef5d76b453908f21341e661a9b6f96862f6f589 ] The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings: dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc") Cc: Lokesh Vutla Reported-by: Suman Anna Reviewed-by: Lokesh Vutla Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- arch/arm/boot/dts/am335x-icev2.dts | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c7..204bccfcc110a 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -432,7 +432,7 @@ pinctrl-0 = <&mmc0_pins_default>; }; -&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 46849d6ecb3e2..1515f4f914999 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,7 +127,7 @@ ranges = <0x0 0x5000 0x1000>; }; - target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "gpio1"; reg = <0x7000 0x4>, -- 2.20.1